Based on previous work by Ryo Kataoka <[email protected]>.
Signed-off-by: Niklas Söderlund <[email protected]>
---
Hi Simon,
The compatibility string 'renesas,r8a77965-thermal' is accepted but not
yet picked up, see '[PATCH v2 0/2] thermal: rcar_gen3_thermal: add
r8a77965 support'.
* Changes since v1
- Rebased to devel branch of Simons tree.
- Switch to R8A77965_PD_ALWAYS_ON instead of 32 in power-domains as the
constant is present in v4.17-rc1. This makes this patch depend on
'[PATCH] arm64: dts: renesas: r8a77965: use r8a77965-sysc binding
definitions' which adds the r8a77965-sysc.h include to the dtsi file.
---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 59 +++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 054ac6be43fac6f3..37c38b0f8f435645 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -136,6 +136,21 @@
/* placeholder */
};
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a77965-thermal";
+ reg = <0 0xe6198000 0 0x100>,
+ <0 0xe61a0000 0 0x100>,
+ <0 0xe61a8000 0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ status = "okay";
+ };
+
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a77965",
"renesas,rcar-gen3-gpio";
@@ -1062,6 +1077,50 @@
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
| IRQ_TYPE_LEVEL_LOW)>;
};
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
/* External USB clocks - can be overridden by the board */
usb3s0_clk: usb3s0 {
compatible = "fixed-clock";
--
2.17.0
