On Sun, May 13, 2018 at 01:48:33PM +0200, Niklas Söderlund wrote:
> Hi Simon,
> On 2018-05-13 10:19:13 +0200, Simon Horman wrote:
> > On Fri, May 11, 2018 at 04:00:29PM +0200, Niklas Söderlund wrote:
> > > Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> > > ---
> > > arch/arm64/boot/dts/renesas/r8a77965.dtsi | 99 ++++++++++++++++++++---
> > > 1 file changed, 90 insertions(+), 9 deletions(-)
> > >
> > > Hi Simon,
> > >
> > > I have only tested i2c4 and the adv7482 which is connected there. But it
> > > seemed silly to post this patch without enable all i2c as they are
> > > according to the datasheet are the same as on H3 and M3-W.
> > Thanks Niklas,
> > I agree this makes sense. Do we have any way to test those nodes?
> Looking at the DT for M3-N the i2c busses used are i2c2 and i2c4. I
> already verified i2c4 and for i2c2 it turned out some PFC parts where
> missing, I just sent a patch for that . Using that patch i2c2 also
> successfully finds the devices described in DT.
> > If not I'm inclined to accept the patch without testing.
> I also think it would be OK for you to pickup this patch without testing
> all the buses.
> 1. [PATCH] pinctrl: sh-pfc: r8a77965: Add I2C pin support