Hi Ulrich, On 2018-05-16 15:07:01 +0200, Ulrich Hecht wrote: > On Wed, Apr 11, 2018 at 11:01 AM, jacopo mondi <jac...@jmondi.org> wrote: > > Hello Kaneko-san, > > > > On Tue, Apr 03, 2018 at 09:43:02PM +0900, Yoshihiro Kaneko wrote: > >> This series adds thermal support for r8a77995. > >> R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2. > >> Therefore this series adds r8a77995 support to rcar_thermal driver not > >> rcar_gen3_thermal driver. > > > > I tested this on D3 Draak. > > > > I generated load expecting the detected temperature to rise. > > > > It took a while, and I only see a slight increase of the temperature > > reported by the 'temp' attribute. > > Pointing a heat gun at the SoC, I managed to get the temperature up to > 80000, and it went back to 40000 when I removed it. I'd say this > works.
I like your style! I contemplated using a hairdryer when testing some Gen3 thermal work but decided against it. Good too see others are not as weak minded as my self :-) > > Tested-By: Ulrich Hecht <ulrich.hecht+rene...@gmail.com> > > CU > Uli -- Regards, Niklas Söderlund
