On 06/05/2018 10:07 AM, Simon Horman wrote:
> On Mon, Jun 04, 2018 at 07:59:11PM +0200, Marek Vasut wrote:
>> Rather than hard-coding the quirk topology, which stopped scaling,
>> parse the information from DT. The code looks for all compatible
>> PMICs -- da9036 and da9210 -- and checks if their IRQ line is tied
>> to the same pin. If so, the code sends a matching sequence to the
>> PMIC to deassert the IRQ.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
>> Cc: Geert Uytterhoeven <geert+rene...@glider.be>
>> Cc: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
>> Cc: Simon Horman <horms+rene...@verge.net.au>
>> Cc: Wolfram Sang <wsa+rene...@sang-engineering.com>
>> Cc: linux-renesas-soc@vger.kernel.org
>> ---
>> V2: - Replace the DT shared IRQ check loop with memcmp()
>> - Send the I2C message to deassert the IRQ line to all PMICs
>> in the list with shared IRQ line instead of just one
>> - Add comment that this works only in case all the PMICs are
>> on the same I2C bus
>> V3: - Drop the addr = 0x00 init
>> - Drop reinit of argsa in rcar_gen2_regulator_quirk
>> ---
>> arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 114
>> ++++++++++++++++-----
>> 1 file changed, 90 insertions(+), 24 deletions(-)
>>
>> diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
>> b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
>> index 93f628acfd94..b919073aa27e 100644
>> --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
>> +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
>> @@ -31,8 +31,10 @@
>> #include <linux/i2c.h>
>> #include <linux/init.h>
>> #include <linux/io.h>
>> +#include <linux/list.h>
>> #include <linux/notifier.h>
>> #include <linux/of.h>
>> +#include <linux/of_irq.h>
>> #include <linux/mfd/da9063/registers.h>
>>
>>
>> @@ -44,34 +46,45 @@
>> /* start of DA9210 System Control and Event Registers */
>> #define DA9210_REG_MASK_A 0x54
>>
>> +struct regulator_quirk {
>> + struct list_head list;
>> + const struct of_device_id *id;
>> + struct of_phandle_args irq_args;
>> + struct i2c_msg i2c_msg;
>> + bool shared; /* IRQ line is shared */
>> +};
>> +
>> +static LIST_HEAD(quirk_list);
>> static void __iomem *irqc;
>>
>> /* first byte sets the memory pointer, following are consecutive reg values
>> */
>> static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff,
>> 0xff };
>> static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
>>
>> -static struct i2c_msg da9xxx_msgs[3] = {
>> - {
>> - .addr = 0x58,
>> - .len = ARRAY_SIZE(da9063_irq_clr),
>> - .buf = da9063_irq_clr,
>> - }, {
>> - .addr = 0x68,
>> - .len = ARRAY_SIZE(da9210_irq_clr),
>> - .buf = da9210_irq_clr,
>> - }, {
>> - .addr = 0x70,
>> - .len = ARRAY_SIZE(da9210_irq_clr),
>> - .buf = da9210_irq_clr,
>> - },
>> +static struct i2c_msg da9063_msgs = {
>> + .len = ARRAY_SIZE(da9063_irq_clr),
>> + .buf = da9063_irq_clr,
>> +};
>> +
>> +static struct i2c_msg da9210_msgs = {
>> + .len = ARRAY_SIZE(da9210_irq_clr),
>> + .buf = da9210_irq_clr,
>> +};
>> +
>> +static const struct of_device_id rcar_gen2_quirk_match[] = {
>> + { .compatible = "dlg,da9063", .data = &da9063_msgs },
>> + { .compatible = "dlg,da9210", .data = &da9210_msgs },
>> + {},
>> };
>>
>> static int regulator_quirk_notify(struct notifier_block *nb,
>> unsigned long action, void *data)
>> {
>> + struct regulator_quirk *pos, *tmp;
>> struct device *dev = data;
>> struct i2c_client *client;
>> static bool done;
>> + int ret;
>> u32 mon;
>>
>> if (done)
>> @@ -88,17 +101,20 @@ static int regulator_quirk_notify(struct notifier_block
>> *nb,
>> client = to_i2c_client(dev);
>> dev_dbg(dev, "Detected %s\n", client->name);
>>
>> - if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
>> - (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
>> - (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
>> - int ret, len;
>> + /*
>> + * Send message to all PMICs that share an IRQ line to deassert it.
>> + *
>> + * WARNING: This works only if all the PMICs are on the same I2C bus.
>> + */
>> + list_for_each_entry(pos, &quirk_list, list) {
>> + if (!pos->shared)
>> + continue;
>>
>> - /* There are two DA9210 on Stout, one on the other boards. */
>> - len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
>> + dev_info(&client->dev, "clearing %s@0x%02x interrupts\n",
>> + pos->id->compatible, pos->i2c_msg.addr);
>>
>> - dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
>> - ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
>> - if (ret != len)
>> + ret = i2c_transfer(client->adapter, &pos->i2c_msg, 1);
>> + if (ret != 1)
>> dev_err(&client->dev, "i2c error %d\n", ret);
>> }
>>
>> @@ -111,6 +127,11 @@ static int regulator_quirk_notify(struct notifier_block
>> *nb,
>> remove:
>> dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
>>
>> + list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
>> + list_del(&pos->list);
>> + kfree(pos);
>> + }
>> +
>> done = true;
>> iounmap(irqc);
>> return 0;
>> @@ -122,7 +143,13 @@ static struct notifier_block regulator_quirk_nb = {
>>
>> static int __init rcar_gen2_regulator_quirk(void)
>> {
>> - u32 mon;
>> + struct device_node *np;
>> + const struct of_device_id *id;
>> + struct regulator_quirk *quirk;
>> + struct regulator_quirk *pos;
>> + struct of_phandle_args *argsa, *argsb;
>> + u32 mon, addr;
>> + int ret;
>>
>> if (!of_machine_is_compatible("renesas,koelsch") &&
>> !of_machine_is_compatible("renesas,lager") &&
>> @@ -130,6 +157,45 @@ static int __init rcar_gen2_regulator_quirk(void)
>> !of_machine_is_compatible("renesas,gose"))
>> return -ENODEV;
>>
>> + for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
>> + if (!np || !of_device_is_available(np))
>> + break;
>> +
>> + quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
>> +
>> + argsa = &quirk->irq_args;
>> + memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
>> +
>> + ret = of_property_read_u32(np, "reg", &addr);
>> + if (ret)
>> + return ret;
>> +
>> + quirk->id = id;
>> + quirk->i2c_msg.addr = addr;
>> + quirk->shared = false;
>> +
>> + ret = of_irq_parse_one(np, 0, &quirk->irq_args);
>
> As per my comment on v2,
> &quirk->irq_args is assigned to argsa above and used directly here.
>
Hum, OK
--
Best regards,
Marek Vasut
