From: Magnus Damm <[email protected]> Add experimental support for ADV7482 on the r8a77990 Ebisu board.
Not-Signed-off-by: Magnus Damm <[email protected]> --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 91 ++++++++++++++++++++++++ 1 file changed, 91 insertions(+) --- 0001/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ work/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts 2018-06-19 21:14:13.230607110 +0900 @@ -28,6 +28,30 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; + }; + }; &avb { @@ -47,6 +71,65 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio0>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>, + <17 IRQ_TYPE_LEVEL_LOW>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@10 { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi40_in>; + }; + }; + }; +}; + &extal_clk { clock-frequency = <48000000>; }; @@ -63,3 +146,11 @@ &scif2 { status = "okay"; }; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +};
