[PATCH] serial: sh-sci: Stop RX FIFO timer during port shutdown

[Geert Uytterhoeven]

The RX FIFO timer may be armed when the port is shut down, hence the
timer function may still be called afterwards.

Fix this race condition by deleting the timer during port shutdown.

Fixes: 039403765e5da3c6 ("serial: sh-sci: SCIFA/B RX FIFO software timeout")
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
Tested with scifa0 on r8a7740/armadillo, after

    echo 2000 > /sys/devices/platform/e6c40000.serial/rx_fifo_timeout
---
 drivers/tty/serial/sh-sci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 5c870ab80b98e25b..04f5b754e69e28dd 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2100,6 +2100,8 @@ static void sci_shutdown(struct uart_port *port)
        }
 #endif
 
+       if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0)
+               del_timer_sync(&s->rx_fifo_timer);
        sci_free_irq(s);
        sci_free_dma(port);
 }
-- 
2.17.1