The RX FIFO timer may be armed when the port is shut down, hence the
timer function may still be called afterwards.
Fix this race condition by deleting the timer during port shutdown.
Fixes: 039403765e5da3c6 ("serial: sh-sci: SCIFA/B RX FIFO software timeout")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
---
Tested with scifa0 on r8a7740/armadillo, after
echo 2000 > /sys/devices/platform/e6c40000.serial/rx_fifo_timeout
v2:
- Add Reviewed-by.
---
drivers/tty/serial/sh-sci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 360664a9adf66632..6eb65160e0150f27 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2098,6 +2098,8 @@ static void sci_shutdown(struct uart_port *port)
}
#endif
+ if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0)
+ del_timer_sync(&s->rx_fifo_timer);
sci_free_irq(s);
sci_free_dma(port);
}
--
2.17.1
