Hi Simon,
On Thu, Jul 12, 2018 at 3:56 PM Simon Horman <[email protected]> wrote:
> On Wed, Jul 11, 2018 at 04:20:54PM +0200, Geert Uytterhoeven wrote:
> > R-Car Gen3 Hardware Manual Rev.0.54 documents the relation between the
> > MD13 and MD14 mode pins, and the OSC EXTAL predivider, as used by the
> > OSC clock. Hence augment the configuration structure with all
> > documented predivider values.
> >
> > Add the OSC clock using the configured predivider.
> >
> > Signed-off-by: Geert Uytterhoeven <[email protected]>
> > --- a/drivers/clk/renesas/r8a77980-cpg-mssr.c
> > +++ b/drivers/clk/renesas/r8a77980-cpg-mssr.c
> > @@ -171,23 +173,23 @@ static const unsigned int r8a77980_crit_mod_clks[]
> > __initconst = {
> > */
> >
> > /*
> > - * MD EXTAL PLL2 PLL1 PLL3
> > + * MD EXTAL PLL2 PLL1 PLL3 OSC
> > * 14 13 (MHz)
> > - * --------------------------------------------------
> > - * 0 0 16.66 x 1 x240 x192 x192
> > - * 0 1 20 x 1 x200 x160 x160
> > - * 1 0 27 x 1 x148 x118 x118
> > - * 1 1 33.33 / 2 x240 x192 x192
> > + * --------------------------------------------------------
> > + * 0 0 16.66 x 1 x240 x192 x192 /16
> > + * 0 1 20 x 1 x200 x160 x160 /19
> > + * 1 0 27 x 1 x148 x118 x118 /24
>
> Not related to this patch, but in the Users' Manual 1.0
> EXTAL is listed as 27MHz in table 8.4e but 25MHz (below) table 8.2e.
Nice catch:
- Divider 24 is correct for 25 MHz, but not for 27 Mhz.
- Multipliers 148 and 118 are correct for 27 MHz, but not for 25 MHz.
Needs clarification...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
