Add the nodes to enable SATA. Note that MD12 (SW12-7) must be switched off for that to work.
Signed-off-by: Wolfram Sang <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> --- arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 8ded64d0a4d5..3032bdb8c47d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -152,6 +152,15 @@ }; }; +&pca9654 { + pcie_sata_switch { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + &pfc { usb2_pins: usb2 { groups = "usb2"; @@ -176,6 +185,11 @@ }; }; + /* MD12 (SW12-7) must be set 'Off' which is not the default! */ +&sata { + status = "okay"; +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; -- 2.11.0
