Add DA9063 PMIC node to the I2C bus.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Kuninori Morimoto <[email protected]>
Cc: Simon Horman <[email protected]>
Cc: Wolfram Sang <[email protected]>
Cc: [email protected]
---
V2: - Replace shmobile with dts since it's a DT patch in subject
- Connect the 9063_IRQ# line to GP3_31
- Since the DA9063 is connected to both i2c1 and i2c7, connect
it to i2c7, which is the dedicated dvfs i2c.
---
arch/arm/boot/dts/r8a7794-silk.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts
b/arch/arm/boot/dts/r8a7794-silk.dts
index daec965889d3..6ea60e1faf75 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -405,6 +405,23 @@
clock-frequency = <400000>;
};
+&i2c7 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&mmcif0 {
pinctrl-0 = <&mmcif0_pins>;
pinctrl-names = "default";
--
2.16.2
