Successfully tested on H3 ES1.0 and ES2.0, M3-W ES1.0, and M3-N ES1.0. Even previously stubborn cards work fine. Transfer rates were >60MB/s.
Signed-off-by: Wolfram Sang <[email protected]> --- The problems I reported last week were simply me booting the wrong kernel on H3 ES1.0 :( arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++ arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 9256fbaaab7f..b144474ee876 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -736,6 +736,7 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; @@ -765,6 +766,7 @@ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0edb16e6b372..c65a1d8141e4 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -419,6 +419,7 @@ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; -- 2.11.0
