Hi Niklas, with these patches I can use yavta-hdmi script on Draak D3 board.
Compared to v1 I have rebased on top of your latest changes, with the V3M integration that greatly simplified my life. There are a few hack though [3/4] in particular, so I let you judge if you want to include these changes or not. For the record, the capture procedure on D3 is: [root@alarm vin-tests]# ./set-edid EDID set successfully. [root@alarm vin-tests]# ./yavta-hdmi 4 WARING: overriding parallel format to: RGB888_1X24 format: RGB888_1X24 size: 640x480/640x480 field: none/none vdev: /dev/video3 Device /dev/video3 opened. Device `R_Car_VIN' on `platform:e6ef4000.video' (driver 'rcar_vin') supports video, capture, without mplanes. Video format set: XBGR32 (34325258) 640x480 (stride 2560) field none buffer size 1228800 Video format: XBGR32 (34325258) 640x480 (stride 2560) field none buffer size 1228800 Device /dev/video3 opened. Device `R_Car_VIN' on `platform:e6ef4000.video' (driver 'rcar_vin') supports video, capture, without mplanes. Video format: XBGR32 (34325258) 640x480 (stride 2560) field none buffer size 1228800 4 buffers requested. length: 1228800 offset: 0 timestamp type/source: mono/EoF Buffer 0/0 mapped at address 0xffffa3034000. length: 1228800 offset: 1228800 timestamp type/source: mono/EoF Buffer 1/0 mapped at address 0xffffa2f08000. length: 1228800 offset: 2457600 timestamp type/source: mono/EoF Buffer 2/0 mapped at address 0xffffa2ddc000. length: 1228800 offset: 3686400 timestamp type/source: mono/EoF Buffer 3/0 mapped at address 0xffffa2cb0000. 0 (1) [-] none 0 1228800 B 6196.484974 6196.485053 22.681 fps ts mono/EoF 1 (2) [-] none 1 1228800 B 6196.501657 6196.508303 59.941 fps ts mono/EoF 2 (0) [-] none 2 1228800 B 6196.518341 6196.531824 59.938 fps ts mono/EoF 3 (3) [-] none 3 1228800 B 6196.535027 6196.555485 59.930 fps ts mono/EoF 4 (1) [-] none 5 1228800 B 6196.568386 6196.579076 29.977 fps ts mono/EoF 5 (2) [-] none 6 1228800 B 6196.585073 6196.602437 59.927 fps ts mono/EoF 6 (0) [-] none 8 1228800 B 6196.618447 6196.625953 29.963 fps ts mono/EoF 7 (3) [-] none 9 1228800 B 6196.635130 6196.649540 59.941 fps ts mono/EoF 8 (1) [-] none 11 1228800 B 6196.668488 6196.673171 29.978 fps ts mono/EoF 9 (2) [-] none 12 1228800 B 6196.685175 6196.696770 59.927 fps ts mono/EoF Captured 10 frames in 0.255885 seconds (39.080054 fps, 48021569.750941 B/s). And I have converted images with: $for i in `ls frame-*.bin`; do raw2rgbpnm -f BGR32 -s640x480 $i /tmp/$i.pnm; done I am not sure about the formats I have used, but they give me the best results, even if the images are flickered and not completely centered :/ Thanks j Jacopo Mondi (4): vin-tests: Add support for D3 Draak vin-tests: Fix vdev name in propagate_parallel vin-tests: Add capture format for parallel input vin-tests: yavta-hdmi: Add VIN4 and parallel link scripts/boards.sh | 11 +++++++++++ scripts/vin-tests.sh | 3 ++- yavta-hdmi | 13 +++++++++++-- 3 files changed, 24 insertions(+), 3 deletions(-) -- 2.7.4
