Hi Rob,
On Wed, Aug 29, 2018 at 2:52 AM Rob Herring <[email protected]> wrote:
> On Mon, Aug 27, 2018 at 11:21:39AM -0500, Chris Brandt wrote:
> > Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
> > Standby.
> >
> > The Module Standby HW in the RZ/A series is very close to R-Car HW, except
> > for how the registers are laid out.
> > The MSTP registers are only 8-bits wide, there is no status registers
> > (MSTPST), and the register offsets are a little different. Since the RZ/A
> > hardware manuals refer to these registers as the Standby Control Registers,
> > we'll use that name to distinguish the RZ/A type for the R-Car type.
> >
> > Signed-off-by: Chris Brandt <[email protected]>
> > ---
>
> > +++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c
> > @@ -0,0 +1,192 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
>
>
> > +++ b/include/dt-bindings/clock/r7s9210-cpg-mssr.h
> > @@ -0,0 +1,21 @@
> > +/* SPDX-License-Identifier: GPL-2.0+
>
> The proper identifier is GPL-2.0-or-later
Documentation/process/license-rules.rst disagrees.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
