From: Biju Das <[email protected]> Specify EtherAVB PHY IRQ in the board specific device tree, now that we have GPIO support.
Signed-off-by: Biju Das <[email protected]> Reviewed-by: Fabrizio Castro <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 56182eec81fb..22da819f186b 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -35,6 +35,8 @@ phy3: ethernet-phy@3 { reg = <3>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; }; }; -- 2.11.0
