Using the common kernel pattern to bail out at the beginning if some
conditions are not met, we can save a level of indentation. No
functional change.

Signed-off-by: Wolfram Sang <[email protected]>
---
 drivers/i2c/i2c-core-base.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index c2b352c46fae..799776c6d421 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1922,6 +1922,11 @@ int i2c_transfer(struct i2c_adapter *adap, struct 
i2c_msg *msgs, int num)
 {
        int ret;
 
+       if (!adap->algo->master_xfer) {
+               dev_dbg(&adap->dev, "I2C level transfers not supported\n");
+               return -EOPNOTSUPP;
+       }
+
        /* REVISIT the fault reporting model here is weak:
         *
         *  - When we get an error after receiving N bytes from a slave,
@@ -1938,25 +1943,19 @@ int i2c_transfer(struct i2c_adapter *adap, struct 
i2c_msg *msgs, int num)
         *    one (discarding status on the second message) or errno
         *    (discarding status on the first one).
         */
-
-       if (adap->algo->master_xfer) {
-               if (in_atomic() || irqs_disabled()) {
-                       ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
-                       if (!ret)
-                               /* I2C activity is ongoing. */
-                               return -EAGAIN;
-               } else {
-                       i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
-               }
-
-               ret = __i2c_transfer(adap, msgs, num);
-               i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
-
-               return ret;
+       if (in_atomic() || irqs_disabled()) {
+               ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
+               if (!ret)
+                       /* I2C activity is ongoing. */
+                       return -EAGAIN;
        } else {
-               dev_dbg(&adap->dev, "I2C level transfers not supported\n");
-               return -EOPNOTSUPP;
+               i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
        }
+
+       ret = __i2c_transfer(adap, msgs, num);
+       i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
+
+       return ret;
 }
 EXPORT_SYMBOL(i2c_transfer);
 
-- 
2.18.0

Reply via email to