The RZ/A2 watchdog timer extends the clock source options in order to
allow for longer timeouts.
Signed-off-by: Chris Brandt <chris.bra...@renesas.com>
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
---
v5:
* Added type casting as pointed out by kbuild test robot
* Added Reviewed-by
v4:
* Documented CKS_3BIT/CKS_4BIT better
* Changed 16384 and 4194304 into #define
* Removed rza_wdt.timeout
* Removed extra ( ) from DIV_ROUND_UP
* Removed check for counter value > 256
* Added set_timeout function
* Removed checking for new timeout value in ping function
* Removed unneeded 'else' case when checking .data in probe
v3:
* Removed + 1 from DIV_ROUND_UP line
* resetting to 0 if time to big did not make as much sense are resetting
to 256
v2:
* use DIV_ROUND_UP
* use %u for pr_debug
* use of_match data to determine the size of CKS register
---
drivers/watchdog/rza_wdt.c | 88 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 70 insertions(+), 18 deletions(-)
diff --git a/drivers/watchdog/rza_wdt.c b/drivers/watchdog/rza_wdt.c
index e618218d2374..920fd4b31f29 100644
--- a/drivers/watchdog/rza_wdt.c
+++ b/drivers/watchdog/rza_wdt.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
@@ -34,12 +35,45 @@
#define WRCSR_RSTE BIT(6)
#define WRCSR_CLEAR_WOVF 0xA500 /* special value */
+/* The maximum CKS register setting value to get the longest timeout */
+#define CKS_3BIT 0x7
+#define CKS_4BIT 0xF
+
+#define DIVIDER_3BIT 16384 /* Clock divider when CKS = 0x7 */
+#define DIVIDER_4BIT 4194304 /* Clock divider when CKS = 0xF */
+
struct rza_wdt {
struct watchdog_device wdev;
void __iomem *base;
struct clk *clk;
+ u8 count;
+ u8 cks;
};
+static void rza_wdt_calc_timeout(struct rza_wdt *priv, int timeout)
+{
+ unsigned long rate = clk_get_rate(priv->clk);
+ unsigned int ticks;
+
+ if (priv->cks == CKS_4BIT) {
+ ticks = DIV_ROUND_UP(timeout * rate, DIVIDER_4BIT);
+
+ /*
+ * Since max_timeout was set in probe, we know that the timeout
+ * value passed will never calculate to a tick value greater
+ * than 256.
+ */
+ priv->count = 256 - ticks;
+
+ } else {
+ /* Start timer with longest timeout */
+ priv->count = 0;
+ }
+
+ pr_debug("%s: timeout set to %u (WTCNT=%d)\n", __func__,
+ timeout, priv->count);
+}
+
static int rza_wdt_start(struct watchdog_device *wdev)
{
struct rza_wdt *priv = watchdog_get_drvdata(wdev);
@@ -51,13 +85,12 @@ static int rza_wdt_start(struct watchdog_device *wdev)
readb(priv->base + WRCSR);
writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
- /*
- * Start timer with slowest clock source and reset option enabled.
- */
+ rza_wdt_calc_timeout(priv, wdev->timeout);
+
writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
- writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
- writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME | WTSCR_CKS(7),
- priv->base + WTCSR);
+ writew(WTCNT_MAGIC | priv->count, priv->base + WTCNT);
+ writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME |
+ WTSCR_CKS(priv->cks), priv->base + WTCSR);
return 0;
}
@@ -75,8 +108,17 @@ static int rza_wdt_ping(struct watchdog_device *wdev)
{
struct rza_wdt *priv = watchdog_get_drvdata(wdev);
- writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+ writew(WTCNT_MAGIC | priv->count, priv->base + WTCNT);
+ pr_debug("%s: timeout = %u\n", __func__, wdev->timeout);
+
+ return 0;
+}
+
+static int rza_set_timeout(struct watchdog_device *wdev, unsigned int timeout)
+{
+ wdev->timeout = timeout;
+ rza_wdt_start(wdev);
return 0;
}
@@ -121,6 +163,7 @@ static const struct watchdog_ops rza_wdt_ops = {
.start = rza_wdt_start,
.stop = rza_wdt_stop,
.ping = rza_wdt_ping,
+ .set_timeout = rza_set_timeout,
.restart = rza_wdt_restart,
};
@@ -150,20 +193,28 @@ static int rza_wdt_probe(struct platform_device *pdev)
return -ENOENT;
}
- /* Assume slowest clock rate possible (CKS=7) */
- rate /= 16384;
-
priv->wdev.info = &rza_wdt_ident,
priv->wdev.ops = &rza_wdt_ops,
priv->wdev.parent = &pdev->dev;
- /*
- * Since the max possible timeout of our 8-bit count register is less
- * than a second, we must use max_hw_heartbeat_ms.
- */
- priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate;
- dev_dbg(&pdev->dev, "max hw timeout of %dms\n",
- priv->wdev.max_hw_heartbeat_ms);
+ priv->cks = (u8)(uintptr_t)of_device_get_match_data(&pdev->dev);
+ if (priv->cks == CKS_4BIT) {
+ /* Assume slowest clock rate possible (CKS=0xF) */
+ priv->wdev.max_timeout = (DIVIDER_4BIT * U8_MAX) / rate;
+
+ } else if (priv->cks == CKS_3BIT) {
+ /* Assume slowest clock rate possible (CKS=7) */
+ rate /= DIVIDER_3BIT;
+
+ /*
+ * Since the max possible timeout of our 8-bit count
+ * register is less than a second, we must use
+ * max_hw_heartbeat_ms.
+ */
+ priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate;
+ dev_dbg(&pdev->dev, "max hw timeout of %dms\n",
+ priv->wdev.max_hw_heartbeat_ms);
+ }
priv->wdev.min_timeout = 1;
priv->wdev.timeout = DEFAULT_TIMEOUT;
@@ -179,7 +230,8 @@ static int rza_wdt_probe(struct platform_device *pdev)
}
static const struct of_device_id rza_wdt_of_match[] = {
- { .compatible = "renesas,rza-wdt", },
+ { .compatible = "renesas,r7s9210-wdt", .data = (void *)CKS_4BIT, },
+ { .compatible = "renesas,rza-wdt", .data = (void *)CKS_3BIT, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rza_wdt_of_match);
--
2.16.1
