On Thu, Nov 1, 2018 at 8:53 AM Niklas Söderlund
<niklas.soderl...@ragnatech.se> wrote:
>
> From: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
>
> SD / MMC did not operate properly when suspend transition failed.
> Because the SCC was not reset at resume, issue of the command failed.
> Call the host specific reset function and reset the hardware in order to
> add reset of SCC. This change also fixes tuning on some stubborn cards
> on Gen2.
>
> Based on work from Masaharu Hayakawa.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
>
> ---
> * Changes sine v1
> - Merge tmio_mmc_reset() into tmio_mmc_hw_reset() as it's now the only
> caller.
>
> * Changes since v2
> - Rebased on mmc/next caused small refactoring of the code.
> ---
> drivers/mmc/host/tmio_mmc_core.c | 26 +++++++++++++++-----------
> 1 file changed, 15 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/mmc/host/tmio_mmc_core.c
> b/drivers/mmc/host/tmio_mmc_core.c
> index 953562a12a0d6ebc..662161be03b6d52e 100644
> --- a/drivers/mmc/host/tmio_mmc_core.c
> +++ b/drivers/mmc/host/tmio_mmc_core.c
> @@ -171,6 +171,18 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
> }
> }
>
> +static void tmio_mmc_hw_reset(struct mmc_host *mmc)
> +{
> + struct tmio_mmc_host *host = mmc_priv(mmc);
> +
> + host->reset(host);
> +
> + tmio_mmc_abort_dma(host);
> +
> + if (host->hw_reset)
> + host->hw_reset(host);
> +}
> +
> static void tmio_mmc_reset_work(struct work_struct *work)
> {
> struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
> @@ -209,7 +221,7 @@ static void tmio_mmc_reset_work(struct work_struct *work)
>
> spin_unlock_irqrestore(&host->lock, flags);
>
> - host->reset(host);
> + tmio_mmc_hw_reset(host->mmc);
>
> /* Ready for new calls */
> host->mrq = NULL;
I see tmio_mmc_abort_dma() a few lines below.
If you add tmio_mmc_abort_dma() into tmio_mmc_hw_reset(),
you do not need to abort DMA twice, don't you?
tmio_mmc_hw_reset(host->mmc);
/* Ready for new calls */
host->mrq = NULL;
tmio_mmc_abort_dma(host); /* <-- abort DMA again? */
mmc_request_done(host->mmc, mrq);
}
> @@ -696,14 +708,6 @@ static int tmio_mmc_start_data(struct tmio_mmc_host
> *host,
> return 0;
> }
>
> -static void tmio_mmc_hw_reset(struct mmc_host *mmc)
> -{
> - struct tmio_mmc_host *host = mmc_priv(mmc);
> -
> - if (host->hw_reset)
> - host->hw_reset(host);
> -}
> -
> static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
> {
> struct tmio_mmc_host *host = mmc_priv(mmc);
> @@ -1228,7 +1232,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
> _host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
>
> _host->set_clock(_host, 0);
> - _host->reset(_host);
> + tmio_mmc_hw_reset(mmc);
I think it is weird to call tmio_mmc_abort_dma()
before tmio_mmc_request_dma().
> _host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host,
> CTL_IRQ_MASK);
> tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
> @@ -1329,7 +1333,7 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
> struct tmio_mmc_host *host = dev_get_drvdata(dev);
>
> tmio_mmc_clk_enable(host);
> - host->reset(host);
> + tmio_mmc_hw_reset(host->mmc);
>
> if (host->clk_cache)
> host->set_clock(host, host->clk_cache);
> --
> 2.19.1
>
--
Best Regards
Masahiro Yamada
