Hi Hoan,
Thanks for your work.
On 2018-11-02 16:06:10 +0900, Nguyen An Hoan wrote:
> From: Hoan Nguyen An <na-h...@jinso.co.jp>
>
> According to the hardware manual, Gen3 supports Standby-mode.
> Add this function, and we should use this function while
> suspend to reduce the energy consumption.
Out of curiosity is the power saved measurable?
>
> Signed-off-by: Hoan Nguyen An <na-h...@jinso.co.jp>
> ---
> drivers/thermal/rcar_gen3_thermal.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/rcar_gen3_thermal.c
> b/drivers/thermal/rcar_gen3_thermal.c
> index 7aed533..85fc4b2 100644
> --- a/drivers/thermal/rcar_gen3_thermal.c
> +++ b/drivers/thermal/rcar_gen3_thermal.c
> @@ -447,11 +447,32 @@ static int rcar_gen3_thermal_probe(struct
> platform_device *pdev)
> return ret;
> }
>
> +static int rcar_gen3_thermal_standby(struct rcar_gen3_thermal_priv* priv)
I don't want to bikeshed about the name but the datasheet confuses me as
it documents the standby and reset procedures to be exactly the same, or
am I missing something? If they are indeed one and the same I would
prefers this function to be called rcar_gen3_thermal_reset() and in
rcar_gen3_thermal_suspend() add a comment "Reset to enter standby mode"
or something similar. But it's up to you.
> +{
> + unsigned int i;
> + u32 reg_val;
> +
> + for (i = 0; i < TSC_MAX_NUM; i++) {
> + struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
> +
> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, 0);
> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
> +
> + reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
> + rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val &
> ~THCTR_THSST);
Too many new lines.
> +
> +
> + usleep_range(1000, 2000);
Can't the sleep be moved outside the loop? We can reset all TSC and then
wait the required 1 ms only once while they all are reset or are they
somehow dependent on being reset in sequence?
> + }
> +
> + return 0;
> +}
> +
> static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev)
> {
> struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
>
> - rcar_thermal_irq_set(priv, false);
> + rcar_gen3_thermal_standby(priv);
>
> return 0;
> }
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
