The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules are SoC specific and should be part of board dts rather than SoM dtsi. By moving these nodes to the common dtsi it allows cmt and rwdt to be enabled on both of these boards with less lines of code.
Signed-off-by: Biju Das <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> --- V1-->v2 * No change --- arch/arm/boot/dts/iwg20d-q7-common.dtsi | 9 +++++++++ arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 9 --------- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index ca9154dd..e2b1ab9 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -116,6 +116,10 @@ status = "okay"; }; +&cmt0 { + status = "okay"; +}; + &hsusb { status = "okay"; pinctrl-0 = <&usb0_pins>; @@ -230,6 +234,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index 0e2e033..b3fee1d 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -31,10 +31,6 @@ }; }; -&cmt0 { - status = "okay"; -}; - &extal_clk { clock-frequency = <20000000>; }; @@ -88,11 +84,6 @@ }; }; -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; -- 2.7.4
