On Fri, Sep 21, 2018 at 08:53:21PM +0900, Yoshihiro Shimoda wrote:
> This patch unifies the OBINTEN handling to clean-up the code.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
The nit below notwithstanding.
Reviewed-by: Simon Horman <horms+rene...@verge.net.au>
> ---
> drivers/phy/renesas/phy-rcar-gen3-usb2.c | 23 +++++++++++++++--------
> 1 file changed, 15 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> index 856056e..e7eaed9 100644
> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -142,6 +142,18 @@ static void rcar_gen3_enable_vbus_ctrl(struct
> rcar_gen3_chan *ch, int vbus)
> writel(val, usb2_base + USB2_ADPCTRL);
> }
>
> +static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
> +{
nit: Perhaps bool would be a better type for the enable parameter.
> + void __iomem *usb2_base = ch->base;
> + u32 val = readl(usb2_base + USB2_OBINTEN);
> +
> + if (enable)
> + val |= USB2_OBINT_BITS;
> + else
> + val &= ~USB2_OBINT_BITS;
> + writel(val, usb2_base + USB2_OBINTEN);
> +}
> +
> static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
> {
> rcar_gen3_set_linectrl(ch, 1, 1);
> @@ -187,16 +199,12 @@ static void rcar_gen3_init_for_a_peri(struct
> rcar_gen3_chan *ch)
>
> static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
> {
> - void __iomem *usb2_base = ch->base;
> - u32 val;
> -
> - val = readl(usb2_base + USB2_OBINTEN);
> - writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
> + rcar_gen3_control_otg_irq(ch, 0);
>
> rcar_gen3_enable_vbus_ctrl(ch, 1);
> rcar_gen3_init_for_host(ch);
>
> - writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
> + rcar_gen3_control_otg_irq(ch, 1);
> }
>
> static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
> @@ -286,8 +294,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
> val = readl(usb2_base + USB2_VBCTRL);
> writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
> writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
> - val = readl(usb2_base + USB2_OBINTEN);
> - writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
> + rcar_gen3_control_otg_irq(ch, 1);
> val = readl(usb2_base + USB2_ADPCTRL);
> writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
> val = readl(usb2_base + USB2_LINECTRL1);
> --
> 1.9.1
>
