Hi Phil,
On Wed, Sep 26, 2018 at 11:11 AM Phil Edworthy
<phil.edwor...@renesas.com> wrote:
> This implements the pinctrl driver for the RZ/N1 family of devices, including
> the R9A06G032 (RZ/N1D) device.
>
> This series was originally written by Michel Pollet whilst at Renesas, and I
> have taken over this work.
>
> Main changes:
> v5:
> - Address Jacopo's further comments
> - Address Geert's comments
>
> v4:
> - Address Jacopo's comments
> - Add alternative way to use the pinmux prop.
> - Remove mention of gpios.
> - Implement pin_config_group_get()
> - Fix function to get pin configs, i.e. return -EINVAL when disabled.
>
> v3:
> - Use standard DT props instead of proprietary ones.
> - Replace virtual pins used for MDIO muxing with extra funcs.
> - Use pinctrl_utils funcs to handle the maps.
> - Remove the dbg functions to keep things simple.
> - Change the way the functions are defined so it is easy to check
> against the hardware numbering.
>
> v2:
> - Change to generic rzn1 family driver, instead of device specific.
> - Review comments fixed.
> - Fix error handling during probe
>
> Phil Edworthy (3):
> dt-bindings: pinctrl: renesas,rzn1-pinctrl: documentation
> pinctrl: renesas: Renesas RZ/N1 pinctrl driver
> ARM: dts: r9a06g032: Add pinctrl node
Thanks, will apply the first two patches to sh-pfc-for-v4.2.0.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
