From: Magnus Damm <[email protected]>
According to the data sheet the Ethernet-AVB hardware in R-Car Gen3
and R-Car Gen2 SoCs do not support half duplex operation. So update
the driver to mark 100Mbit and 1Gbps HDX as unsupported.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Magnus Damm <[email protected]>
Reviewed-by: Sergei Shtylyov <[email protected]>
---
Slightly reworked since V2 to make use of phy_remove_link_mode().
In case Sergei wants to opt-out from the Reviewed-by tag for V2 let us know.
Applies on top of next-20181121
drivers/net/ethernet/renesas/ravb_main.c | 4 ++++
1 file changed, 4 insertions(+)
--- 0001/drivers/net/ethernet/renesas/ravb_main.c
+++ work/drivers/net/ethernet/renesas/ravb_main.c 2018-11-21
19:47:58.165498803 +0900
@@ -1088,6 +1088,10 @@ static int ravb_phy_init(struct net_devi
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_Pause_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_Asym_Pause_BIT);
+ /* Half Duplex is not supported */
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+
phy_attached_info(phydev);
return 0;
