Use devm_thermal_zone_of_sensor_register_params() with thermal zone params to enable the hwmon sysfs interface.
Signed-off-by: Marek Vasut <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Eduardo Valentin <[email protected]> Cc: Wolfram Sang <[email protected]> Cc: Zhang Rui <[email protected]> Cc: [email protected] To: [email protected] --- V2: No change --- drivers/thermal/rcar_gen3_thermal.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 75786cc8e2f9..d86b8e746313 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -85,6 +85,10 @@ struct rcar_gen3_thermal_priv { void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc); }; +static struct thermal_zone_params rcar_gen3_tz_of_params = { + .no_hwmon = false, +}; + static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc, u32 reg) { @@ -416,8 +420,8 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) priv->thermal_init(tsc); rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]); - zone = devm_thermal_zone_of_sensor_register(dev, i, tsc, - &rcar_gen3_tz_of_ops); + zone = devm_thermal_zone_of_sensor_register_params(dev, i, tsc, + &rcar_gen3_tz_of_ops, &rcar_gen3_tz_of_params); if (IS_ERR(zone)) { dev_err(dev, "Can't register thermal zone\n"); ret = PTR_ERR(zone); -- 2.18.0
