On Fri, Dec 14, 2018 at 09:37:25AM +0000, Fabrizio Castro wrote:
> Add the I2C[0-7] and IIC Bus Interface for DVFS (IIC for DVFS)
> devices nodes to the r8a774c0 device tree.
>
> Signed-off-by: Fabrizio Castro <[email protected]>
Thanks Fabrizo for this patch, it looks good to me with the exception of
one minor question I have below.
> ---
> arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 143
> ++++++++++++++++++++++++++++++
> 1 file changed, 143 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> index 96a71e3..bf08aba 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> @@ -271,6 +271,149 @@
> resets = <&cpg 407>;
> };
>
> + i2c0: i2c@e6500000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe6500000 0 0x40>;
> + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 931>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 931>;
> + dmas = <&dmac1 0x91>, <&dmac1 0x90>,
> + <&dmac2 0x91>, <&dmac2 0x90>;
> + dma-names = "tx", "rx", "tx", "rx";
> + i2c-scl-internal-delay-ns = <110>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@e6508000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe6508000 0 0x40>;
> + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 930>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 930>;
> + dmas = <&dmac1 0x93>, <&dmac1 0x92>,
> + <&dmac2 0x93>, <&dmac2 0x92>;
> + dma-names = "tx", "rx", "tx", "rx";
> + i2c-scl-internal-delay-ns = <6>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@e6510000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe6510000 0 0x40>;
> + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 929>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 929>;
> + dmas = <&dmac1 0x95>, <&dmac1 0x94>,
> + <&dmac2 0x95>, <&dmac2 0x94>;
> + dma-names = "tx", "rx", "tx", "rx";
> + i2c-scl-internal-delay-ns = <6>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@e66d0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe66d0000 0 0x40>;
> + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 928>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 928>;
> + dmas = <&dmac0 0x97>, <&dmac0 0x96>;
> + dma-names = "tx", "rx";
> + i2c-scl-internal-delay-ns = <110>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@e66d8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe66d8000 0 0x40>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 927>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 927>;
> + dmas = <&dmac0 0x99>, <&dmac0 0x98>;
> + dma-names = "tx", "rx";
> + i2c-scl-internal-delay-ns = <6>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@e66e0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe66e0000 0 0x40>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 919>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 919>;
> + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
> + dma-names = "tx", "rx";
> + i2c-scl-internal-delay-ns = <6>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@e66e8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe66e8000 0 0x40>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 918>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 918>;
> + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
> + dma-names = "tx", "rx";
> + i2c-scl-internal-delay-ns = <6>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@e6690000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,i2c-r8a774c0",
> + "renesas,rcar-gen3-i2c";
> + reg = <0 0xe6690000 0 0x40>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 1003>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 1003>;
> + i2c-scl-internal-delay-ns = <6>;
> + status = "disabled";
> + };
> +
> + i2c_dvfs: i2c@e60b0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,iic-r8a774c0";
> + reg = <0 0xe60b0000 0 0x15>;
My reading of the documentation is that 0x31 would be a more appropriate
size for the register window.
> + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 926>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 926>;
> + dmas = <&dmac0 0x11>, <&dmac0 0x10>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> hscif0: serial@e6540000 {
> compatible = "renesas,hscif-r8a774c0",
> "renesas,rcar-gen3-hscif",
> --
> 2.7.4
>
