On Tue, Dec 18, 2018 at 10:25:09AM +0100, Ulrich Hecht wrote: > > > On December 14, 2018 at 4:58 PM Simon Horman <[email protected]> > > wrote: > > > > > > From: Kazuya Mizuguchi <[email protected]> > > > > According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of > > August 24, 2018, the TX clock internal delay mode doesn't support > > on R-Car E3. This patch fixes EthernetAVB phy mode to rgmii. > > > > v2 [Simon Horman] > > * Simply drop phy-mode property from r8a77990-ebisu.dts > > as the default property for this for r8a77990, as set in > > r8a77990.dtsi, is "rgmii". > > > > Signed-off-by: Kazuya Mizuguchi <[email protected]> > > Signed-off-by: Takeshi Kihara <[email protected]> > > Signed-off-by: Simon Horman <[email protected]> > > --- > > arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 1 - > > 1 file changed, 1 deletion(-) > > > > Based on renesas-devel-20181213-v4.20-rc6 > > > > diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts > > b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts > > index 62bdddcbbae7..b7082c5bab60 100644 > > --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts > > +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts > > @@ -248,7 +248,6 @@ > > pinctrl-names = "default"; > > renesas,no-ether-link; > > phy-handle = <&phy0>; > > - phy-mode = "rgmii-txid"; > > status = "okay"; > > > > phy0: ethernet-phy@0 { > > -- > > 2.11.0 > > > > Reviewed-by: Ulrich Hecht <[email protected]>
Thanks, applied for v4.22.
