From: Hoan Nguyen An <[email protected]>
The current state of the spi-sh-msiof, in master transfer mode: if t->
bits_per_word <= 8,
if the data length is divisible by 4 ((len & 3) = 0), the length of each word
will be 32 bits
In case of data length can not be divisible by 4 ((len & 3) != 0), always set
each word to be
8 bits, this will increase the number of times that write to FIFO, increasing
the number of
times it should be transmitted. Assume that the number of bytes of data length
more than 64 bytes,
each transmission will write 64 times into the TFDR then transmit, a maximum
one-time
transmission will transmit 64 bytes if each word is 8 bits long.
Switch to setting if t->bits_per_word <= 8, the word length will be 32 bits
although the data
length is not divisible by 4, then if leftover, will transmit the balance and
the length of each
words is 1 byte. The maximum each can transmit up to 64 x 4 (Data Size = 32
bits (4 bytes)) = 256 bytes.
TMDR2 : Bits 28 to 24 BITLEN1[4:0] Data Size (8 to 32 bits)
Bits 23 to 16 WDLEN1[7:0] Word Count (1 to 64 words)
Signed-off-by: Hoan Nguyen An <[email protected]>
---
drivers/spi/spi-sh-msiof.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index d495d86..d14b407 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -977,7 +977,7 @@ static int sh_msiof_transfer_one(struct spi_master *master,
return 0;
}
- if (bits <= 8 && len > 15 && !(len & 3)) {
+ if (bits <= 8 && len > 15) {
bits = 32;
swab = true;
} else {
@@ -1038,6 +1038,14 @@ static int sh_msiof_transfer_one(struct spi_master
*master,
if (rx_buf)
rx_buf += n * bytes_per_word;
words -= n;
+
+ if (words == 0 && (len % bytes_per_word)) {
+ words = len % bytes_per_word;
+ bits = t->bits_per_word;
+ bytes_per_word = 1;
+ tx_fifo = sh_msiof_spi_write_fifo_8;
+ rx_fifo = sh_msiof_spi_read_fifo_8;
+ }
}
return 0;
--
2.7.4
