> On January 7, 2019 at 5:23 PM Geert Uytterhoeven <[email protected]> 
> wrote:
> 
> 
> Extract the functionality to direct new serial port interrupts back to
> the CPU into its own helper, to prepare for using it from a second
> callsite.
> 
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
> v5:
>   - New.
> ---
>  drivers/tty/serial/sh-sci.c | 23 +++++++++++++++--------
>  1 file changed, 15 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
> index 4c75468680cb547d..4d814c30c4189b56 100644
> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -1274,6 +1274,20 @@ static void start_hrtimer_us(struct hrtimer *hrt, 
> unsigned long usec)
>       hrtimer_start(hrt, t, HRTIMER_MODE_REL);
>  }
>  
> +static void sci_dma_rx_reenable_irq(struct sci_port *s)
> +{
> +     struct uart_port *port = &s->port;
> +     u16 scr;
> +
> +     /* Direct new serial port interrupts back to CPU */
> +     scr = serial_port_in(port, SCSCR);
> +     if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
> +             scr &= ~SCSCR_RDRQE;
> +             enable_irq(s->irqs[SCIx_RXI_IRQ]);
> +     }
> +     serial_port_out(port, SCSCR, scr | SCSCR_RIE);
> +}
> +
>  static void sci_dma_rx_complete(void *arg)
>  {
>       struct sci_port *s = arg;
> @@ -1453,7 +1467,6 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer 
> *t)
>       unsigned long flags;
>       unsigned int read;
>       int active, count;
> -     u16 scr;
>  
>       dev_dbg(port->dev, "DMA Rx timed out\n");
>  
> @@ -1503,13 +1516,7 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer 
> *t)
>       if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
>               sci_submit_rx(s, true);
>  
> -     /* Direct new serial port interrupts back to CPU */
> -     scr = serial_port_in(port, SCSCR);
> -     if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
> -             scr &= ~SCSCR_RDRQE;
> -             enable_irq(s->irqs[SCIx_RXI_IRQ]);
> -     }
> -     serial_port_out(port, SCSCR, scr | SCSCR_RIE);
> +     sci_dma_rx_reenable_irq(s);
>  
>       spin_unlock_irqrestore(&port->lock, flags);
>  
> -- 
> 2.17.1
>

Reviewed-by: Ulrich Hecht <[email protected]>

CU
Uli

Reply via email to