On Wed, Jan 23, 2019 at 07:42:58PM +0100, Wolfram Sang wrote: > On Wed, Jan 23, 2019 at 11:18:54AM +0100, Simon Horman wrote: > > On Sat, Jan 19, 2019 at 12:36:42PM +0100, Wolfram Sang wrote: > > > I think it is clear enough if we have the explanation once and make it > > > clear it is applicable for both SCL and SDA. > > > > > > Signed-off-by: Wolfram Sang <[email protected]> > > > --- > > > drivers/i2c/busses/i2c-gpio.c | 15 ++++----------- > > > 1 file changed, 4 insertions(+), 11 deletions(-) > > > > > > diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c > > > index c008d209f0b8..b9d43bc2853f 100644 > > > --- a/drivers/i2c/busses/i2c-gpio.c > > > +++ b/drivers/i2c/busses/i2c-gpio.c > > > @@ -286,10 +286,10 @@ static int i2c_gpio_probe(struct platform_device > > > *pdev) > > > > > > /* > > > * First get the GPIO pins; if it fails, we'll defer the probe. > > > - * If the SDA line is marked from platform data or device tree as > > > - * "open drain" it means something outside of our control is making > > > - * this line being handled as open drain, and we should just handle > > > - * it as any other output. Else we enforce open drain as this is > > > + * If the SCL/SDA lines are marked from platform data or device tree > > > + * as "open drain" it means something outside of our control is making > > > + * these lines being handled as open drain, and we should just handle > > > + * them as any other output. Else we enforce open drain as this is > > > * required for an I2C bus. > > > > <2c> > > If the SCL/SDA lines are marked "open drain" by platform data or > > device tree then this means that something outside of our control is > > marking these lines to be handled as open drain, and we should just > > handle them as we handle any other output. Else we enforce open > > drain as this is required for an I2C bus. > > </2c> > > Cool, thanks Simon. Should I add your SoB when sending V2?
Sure, Signed-off-by: Simon Horman <[email protected]>
