I think it is clear enough if we have the explanation once and make it clear it is applicable for both SCL and SDA. Reword it a little with the help of Simon's native language skills :)
Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> --- Change since v1: add Simon's rewording drivers/i2c/busses/i2c-gpio.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index c008d209f0b8..e8cde2c40d3f 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -286,11 +286,11 @@ static int i2c_gpio_probe(struct platform_device *pdev) /* * First get the GPIO pins; if it fails, we'll defer the probe. - * If the SDA line is marked from platform data or device tree as - * "open drain" it means something outside of our control is making - * this line being handled as open drain, and we should just handle - * it as any other output. Else we enforce open drain as this is - * required for an I2C bus. + * If the SCL/SDA lines are marked "open drain" by platform data or + * device tree then this means that something outside of our control is + * marking these lines to be handled as open drain, and we should just + * handle them as we handle any other output. Else we enforce open + * drain as this is required for an I2C bus. */ if (pdata->sda_is_open_drain) gflags = GPIOD_OUT_HIGH; @@ -300,13 +300,6 @@ static int i2c_gpio_probe(struct platform_device *pdev) if (IS_ERR(priv->sda)) return PTR_ERR(priv->sda); - /* - * If the SCL line is marked from platform data or device tree as - * "open drain" it means something outside of our control is making - * this line being handled as open drain, and we should just handle - * it as any other output. Else we enforce open drain as this is - * required for an I2C bus. - */ if (pdata->scl_is_open_drain) gflags = GPIOD_OUT_HIGH; else -- 2.19.1
