On Thu, 21 Feb 2019 at 20:38, Wolfram Sang
<[email protected]> wrote:
>
> From: Takeshi Saito <[email protected]>
>
> In R-Car Gen2 or later, the maximum number of transfer blocks are
> changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register
> should use iowrite32().
>
> If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this
> value will not be cleared. So, SD/MMC card initialization fails.
>
> So, check for the bigger register and use apropriate write. Also, mark
> the register as extended on Gen2.
>
> Signed-off-by: Takeshi Saito <[email protected]>
> [wsa: use max_blk_count in if(), add Gen2, update commit message]
> Signed-off-by: Wolfram Sang <[email protected]>
> Cc: [email protected]
Applied for fixes, thanks!
Kind regards
Uffe
> ---
>
> No Fixes tag because it is hard to point to a specific commit. So, just a
> stable tag. I think as long as it applies, we are good to go.
>
> Yamada-san, please check if your driver needs to set max_blk_count, too.
>
> Tested on a Renesas Lager board (R-Car H2) and Salvator-XS (R-Car M3N).
> Verified with debug prints that the correct code path was executed, no
> regressions encountered when checksumming large files.
>
> drivers/mmc/host/renesas_sdhi_sys_dmac.c | 1 +
> drivers/mmc/host/tmio_mmc.h | 5 +++++
> drivers/mmc/host/tmio_mmc_core.c | 5 ++++-
> 3 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
> b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
> index 8471160316e0..02cd878e209f 100644
> --- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
> +++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
> @@ -65,6 +65,7 @@ static const struct renesas_sdhi_of_data
> of_rcar_gen2_compatible = {
> .scc_offset = 0x0300,
> .taps = rcar_gen2_scc_taps,
> .taps_num = ARRAY_SIZE(rcar_gen2_scc_taps),
> + .max_blk_count = 0xffffffff,
> };
>
> /* Definitions for sampling clocks */
> diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
> index c03529e3f01a..2adb0d24360f 100644
> --- a/drivers/mmc/host/tmio_mmc.h
> +++ b/drivers/mmc/host/tmio_mmc.h
> @@ -277,6 +277,11 @@ static inline void sd_ctrl_write32_as_16_and_16(struct
> tmio_mmc_host *host,
> iowrite16(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
> }
>
> +static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32
> val)
> +{
> + iowrite32(val, host->ctl + (addr << host->bus_shift));
> +}
> +
> static inline void sd_ctrl_write32_rep(struct tmio_mmc_host *host, int addr,
> const u32 *buf, int count)
> {
> diff --git a/drivers/mmc/host/tmio_mmc_core.c
> b/drivers/mmc/host/tmio_mmc_core.c
> index 085a0fab769c..198c811b478c 100644
> --- a/drivers/mmc/host/tmio_mmc_core.c
> +++ b/drivers/mmc/host/tmio_mmc_core.c
> @@ -700,7 +700,10 @@ static int tmio_mmc_start_data(struct tmio_mmc_host
> *host,
>
> /* Set transfer length / blocksize */
> sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
> - sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
> + if (host->mmc->max_blk_count >= SZ_64K)
> + sd_ctrl_write32(host, CTL_XFER_BLK_COUNT, data->blocks);
> + else
> + sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
>
> tmio_mmc_start_dma(host, data);
>
> --
> 2.11.0
>
