On Wed, Dec 05, 2018 at 09:17:04AM +0800, Ulrich Hecht wrote:
> From: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
> 
> Adds compatible strings for the R-Car CAN controller in the D3 SoC.
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
> Acked-by: Rob Herring <r...@kernel.org>
> Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>
> Reviewed-by: Simon Horman <horms+rene...@verge.net.au>

Reviewed-by: Wolfram Sang <wsa+rene...@sang-engineering.com>

Adding Marc to CC.

> ---
>  Documentation/devicetree/bindings/net/can/rcar_can.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt 
> b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> index 9936b9e..a72ced1 100644
> --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> @@ -16,6 +16,7 @@ Required properties:
>             "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
>             "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
>             "renesas,can-r8a77965" if CAN controller is a part of R8A77965 
> SoC.
> +           "renesas,can-r8a77995" if CAN controller is a part of R8A77995 
> SoC.
>             "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible 
> device.
>             "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
>             compatible device.
> @@ -37,7 +38,7 @@ Required properties:
>  - pinctrl-0: pin control group to be used for this controller.
>  - pinctrl-names: must be "default".
>  
> -Required properties for R8A7795, R8A7796 and R8A77965:
> +Required properties for R8A7795, R8A7796, R8A77965 and R8A77995:
>  For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and 
> can
>  be used by both CAN and CAN FD controller at the same time. It needs to be
>  scaled to maximum frequency if any of these controllers use it. This is done
> -- 
> 2.7.4
> 

Attachment: signature.asc
Description: PGP signature

Reply via email to