Hi Kishon, Fabrizio,
> From: Kishon Vijay Abraham I, Sent: Monday, April 1, 2019 9:26 PM
>
> On 01/03/19 4:35 PM, Fabrizio Castro wrote:
> > As stated in the comment found on top of rcar_gen3_phy_usb2_work,
> > we should not be registering the IRQ if !otg_channel || !uses_otg_pins.
> > On top of that, we should also make sure that extcon has been
> > allocated before requesting the irq as rcar_gen3_phy_usb2_work
> > uses it, hence the patch.
> >
> > Fixes: 2b38543c8db1 ("phy: rcar-gen3-usb2: add extcon support")
> > Fixes: 73801b90a38f ("phy: renesas: rcar-gen3-usb2: change a condition
> > "dr_mode"")
> > Signed-off-by: Fabrizio Castro <[email protected]>
>
> merged, thanks.
I'm very sorry, I didn't notice this patch...
I'd like to fix this patch because this patch breaks for R-Car D3.
In this case, should I submit an incremental patch?
> -Kishon
> > ---
> > drivers/phy/renesas/phy-rcar-gen3-usb2.c | 26 +++++++++++++-------------
> > 1 file changed, 13 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> > b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> > index 0a34782..be1a392 100644
> > --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> > +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> > @@ -447,20 +447,8 @@ static int rcar_gen3_phy_usb2_probe(struct
> > platform_device *pdev)
> > if (IS_ERR(channel->base))
> > return PTR_ERR(channel->base);
> >
> > - /* call request_irq for OTG */
> > - irq = platform_get_irq(pdev, 0);
> > - if (irq >= 0) {
> > - INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
> > - irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
> > - IRQF_SHARED, dev_name(dev), channel);
> > - if (irq < 0)
> > - dev_err(dev, "No irq handler (%d)\n", irq);
> > - }
> > -
> > channel->dr_mode = of_usb_get_dr_mode_by_phy(dev->of_node, 0);
> > - if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
> > - int ret;
> > -
> > + if (channel->dr_mode == USB_DR_MODE_OTG) {
R-Car D3 (r8a77995-draak.dts) has dr_mode with "host". So, the board can use
host mode
as default and "role" mode to switch the role for peripheral later. However,
after we
applied this patch, the R-Car D3 USB2.0 cannot switch to the peripheral mode.
Best regards,
Yoshihiro Shimoda
> > channel->is_otg_channel = true;
> > channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
> > "renesas,no-otg-pins");
> > @@ -476,6 +464,18 @@ static int rcar_gen3_phy_usb2_probe(struct
> > platform_device *pdev)
> > }
> > }
> >
> > + if (channel->is_otg_channel && channel->uses_otg_pins) {
> > + /* call request_irq for OTG */
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq >= 0) {
> > + INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
> > + irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
> > + IRQF_SHARED, dev_name(dev),
> > channel);
> > + if (irq < 0)
> > + dev_err(dev, "No irq handler (%d)\n", irq);
> > + }
> > + }
> > +
> > /*
> > * devm_phy_create() will call pm_runtime_enable(&phy->dev);
> > * And then, phy-core will manage runtime pm for this device.
> >
