Dear Niklas-san
Always thanks for your helps!
Sorry for forgetting CC maintainer. CC Maintainers!
On 2019/04/12 4:45, Niklas Söderlund wrote:
Hi Hoan,
Thanks for your work.
Sorry for very late review, somehow this got lost in my inbox.
On 2018-11-06 15:08:26 +0900, Nguyen An Hoan wrote:
From: Hoan Nguyen An <[email protected]>
According to the hardware manual, Gen3 supports Standby/Reset mode.
Add this function, and we should use this function while suspend
to reduce the energy consumption.
Signed-off-by: Hoan Nguyen An <[email protected]>
Nice clean commit and matches the datasheet,
Reviewed-by: Niklas Söderlund <[email protected]>
Interrupts fire both before and after suspending as expected,
Tested-by: Niklas Söderlund <[email protected]>
---
drivers/thermal/rcar_gen3_thermal.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/rcar_gen3_thermal.c
b/drivers/thermal/rcar_gen3_thermal.c
index 7aed533..e654519 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -447,11 +447,32 @@ static int rcar_gen3_thermal_probe(struct platform_device
*pdev)
return ret;
}
+static int rcar_gen3_thermal_reset(struct rcar_gen3_thermal_priv* priv)
+{
+ unsigned int i;
+ u32 reg_val;
+
+ for (i = 0; i < priv->num_tscs; i++) {
+ struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+ rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, 0);
+ rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
+
+ reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
+ rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val &
~THCTR_THSST);
+ }
+
+ usleep_range(1000, 2000);
+
+ return 0;
+}
+
static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev)
{
struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
- rcar_thermal_irq_set(priv, false);
+ /* Reset to enter standby mode */
+ rcar_gen3_thermal_reset(priv);
return 0;
}
--
2.7.4
