[PATCH 10/11] pinctrl: sh-pfc: sh73a0: Use new macros for non-GPIO pins

[Geert Uytterhoeven]

Update the SH-Mobile AG5 pin control driver to use the new macros for
describing pins without GPIO functionality.  This replaces the use of
physical pin numbers on the SH-Mobile AG5 SoC (in 34x34 BGA package) by
symbolic enum values, referring to signal names.

Note that the user-visible names of these pins are still based on pin
numbers instead of signal names, to preserve DT backwards compatibility.

Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
 drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c 
b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
index 78c7219de764afa5..afabd95105d5bef7 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
@@ -43,6 +43,9 @@
        PORT_1(288, fn, pfx##288, sfx), PORT_1(289, fn, pfx##289, sfx), \
        PORT_10(290, fn, pfx##29, sfx), PORT_10(300, fn, pfx##30, sfx)
 
+#define CPU_ALL_NOGP(fn)       \
+       PIN_NOGP(A11, "F26", fn)
+
 enum {
        PINMUX_RESERVED = 0,
 
@@ -1158,11 +1161,13 @@ static const u16 pinmux_data[] = {
 #define SH73A0_PIN_IO_PU_PD(pin)       SH_PFC_PIN_CFG(pin, __IO | __PUD)
 #define SH73A0_PIN_O(pin)              SH_PFC_PIN_CFG(pin, __O)
 
-/* Pin numbers for pins without a corresponding GPIO port number are computed
- * from the row and column numbers with a 1000 offset to avoid collisions with
- * GPIO port numbers.
+/*
+ * Pins not associated with a GPIO port.
  */
-#define PIN_NUMBER(row, col)           (1000+((row)-1)*34+(col)-1)
+enum {
+       PORT_ASSIGN_LAST(),
+       NOGP_ALL(),
+};
 
 static const struct sh_pfc_pin pinmux_pins[] = {
        /* Table 25-1 (I/O and Pull U/D) */
@@ -1437,7 +1442,7 @@ static const struct sh_pfc_pin pinmux_pins[] = {
        SH73A0_PIN_O(309),
 
        /* Pins not associated with a GPIO port */
-       SH_PFC_PIN_NAMED(6, 26, F26),
+       PINMUX_NOGP_ALL(),
 };
 
 /* - BSC -------------------------------------------------------------------- 
*/
@@ -1863,7 +1868,7 @@ static const unsigned int keysc_out7_2_mux[] = {
 };
 static const unsigned int keysc_out8_0_pins[] = {
        /* KEYOUT8 */
-       PIN_NUMBER(6, 26),
+       PIN_A11,
 };
 static const unsigned int keysc_out8_0_mux[] = {
        KEYOUT8_MARK,
@@ -3073,7 +3078,7 @@ static const unsigned int tpu4_to2_mux[] = {
 };
 static const unsigned int tpu4_to3_pins[] = {
        /* TO */
-       PIN_NUMBER(6, 26),
+       PIN_A11,
 };
 static const unsigned int tpu4_to3_mux[] = {
        TPU4TO3_MARK,
-- 
2.17.1