On Wed, May 15, 2019 at 10:32:18AM +0200, Geert Uytterhoeven wrote:
> Hi Marek,
> 
> On Wed, May 15, 2019 at 10:23 AM <marek.va...@gmail.com> wrote:
> > From: Marek Vasut <marek.vasut+rene...@gmail.com>
> >
> > The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
> > Since the line is configured correctly by default, the system works fine.
> > However, add the IRQ line pin multiplexing configuration for completeness.
> >
> > Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
> > Cc: Geert Uytterhoeven <geert+rene...@glider.be>
> > Cc: Simon Horman <horms+rene...@verge.net.au>
> > Cc: linux-renesas-soc@vger.kernel.org
> > To: linux-arm-ker...@lists.infradead.org
> > ---
> > V2: Move the pin control node from iic3 controller to pmic on 7792 Blanche,
> >     since there's only one PMIC on that board.
> 
> Thanks for the update!
> 
> As the tag condition from v1 is now fulfilled:
> Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>

Thanks, applied for v5.3.

Reply via email to