On Mon, Jun 17, 2019 at 02:52:34PM +0200, Geert Uytterhoeven wrote:
> As the .round_rate() callback returns a long clock rate, it cannot
> return clock rates that do not fit in signed long, but do fit in
> unsigned long.  Hence switch the Z clock on R-Car Gen2 from the old
> .round_rate() callback to the newer .determine_rate() callback, which
> does not suffer from this limitation.
> 
> This includes implementing range checking.
> 
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
>  drivers/clk/renesas/clk-rcar-gen2.c | 23 +++++++++++++----------
>  1 file changed, 13 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/clk/renesas/clk-rcar-gen2.c 
> b/drivers/clk/renesas/clk-rcar-gen2.c
> index da9fe3f032eb2a0d..f85837716d2840cf 100644
> --- a/drivers/clk/renesas/clk-rcar-gen2.c
> +++ b/drivers/clk/renesas/clk-rcar-gen2.c
> @@ -66,19 +66,22 @@ static unsigned long cpg_z_clk_recalc_rate(struct clk_hw 
> *hw,
>       return div_u64((u64)parent_rate * mult, 32);
>  }
>  
> -static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
> -                              unsigned long *parent_rate)
> +static int cpg_z_clk_determine_rate(struct clk_hw *hw,
> +                                 struct clk_rate_request *req)
>  {
> -     unsigned long prate  = *parent_rate;
> -     unsigned int mult;
> +     unsigned long prate = req->best_parent_rate;
> +     unsigned int min_mult, max_mult, mult;
>  
> -     if (!prate)
> -             prate = 1;
> +     min_mult = max(div_u64(req->min_rate * 32ULL, prate), 1ULL);
> +     max_mult = min(div_u64(req->max_rate * 32ULL, prate), 32ULL);

nit: the type of the second parameter doesn't look correct to me,
div_u64 expects a u32 divisor.

> +     if (max_mult < min_mult)
> +             return -EINVAL;
>  
> -     mult = div_u64((u64)rate * 32, prate);
> -     mult = clamp(mult, 1U, 32U);
> +     mult = div_u64(req->rate * 32ULL, prate);

Likewise, do we care that prate will be 64bit on 64bit platforms?
(Yes, I know gen2 SoCs are 32bit :)

> +     mult = clamp(mult, min_mult, max_mult);
>  
> -     return *parent_rate / 32 * mult;
> +     req->rate = prate / 32 * mult;
> +     return 0;
>  }
>  
>  static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> @@ -129,7 +132,7 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned 
> long rate,
>  
>  static const struct clk_ops cpg_z_clk_ops = {
>       .recalc_rate = cpg_z_clk_recalc_rate,
> -     .round_rate = cpg_z_clk_round_rate,
> +     .determine_rate = cpg_z_clk_determine_rate,
>       .set_rate = cpg_z_clk_set_rate,
>  };
>  
> -- 
> 2.17.1
> 

Reply via email to