Since commit 1d267ea6539f2663 ("serial: mctrl-gpio: simplify init
routine"), mctrl_gpio_init() returns failure if the assignment to any
member of the gpio array results in an error pointer.
Since commit c359522194593815 ("serial: mctrl_gpio: Avoid probe failures
in case of missing gpiolib"), mctrl_gpio_to_gpiod() returns NULL in the
!CONFIG_GPIOLIB case.
Hence there is no longer a need to check for mctrl_gpio_to_gpiod()
returning an error value. A simple NULL check is sufficient.
This follows the spirit of commit 445df7ff3fd1a0a9 ("serial: mctrl-gpio:
drop usages of IS_ERR_OR_NULL") in the mctrl-gpio core.
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
drivers/tty/serial/mxs-auart.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 4c188f4079b3ea68..e3452597068292f9 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -969,10 +969,8 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s)
}
-#define RTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
- UART_GPIO_RTS))
-#define CTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
- UART_GPIO_CTS))
+#define RTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_RTS)
+#define CTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_CTS)
static void mxs_auart_settermios(struct uart_port *u,
struct ktermios *termios,
struct ktermios *old)
--
2.17.1
