On Fri, Sep 6, 2019 at 12:14 PM Simon Horman <[email protected]> wrote:
>
> Convert Renesas Product Register bindings documentation to json-schema.
>
> Signed-off-by: Simon Horman <[email protected]>
> ---
> Based on v5.3-rc1
> Tested using:
>   make dtbs_check 
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/renesas,prr.yaml
> ---
>  .../devicetree/bindings/arm/renesas,prr.txt        | 20 ------------
>  .../devicetree/bindings/arm/renesas,prr.yaml       | 36 
> ++++++++++++++++++++++
>  2 files changed, 36 insertions(+), 20 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/renesas,prr.txt
>  create mode 100644 Documentation/devicetree/bindings/arm/renesas,prr.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.txt 
> b/Documentation/devicetree/bindings/arm/renesas,prr.txt
> deleted file mode 100644
> index 08e482e953ca..000000000000
> --- a/Documentation/devicetree/bindings/arm/renesas,prr.txt
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -Renesas Product Register
> -
> -Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register 
> that
> -allows to retrieve SoC product and revision information.  If present, a 
> device
> -node for this register should be added.
> -
> -Required properties:
> -  - compatible: Must be one of:
> -    "renesas,prr"
> -    "renesas,bsid"
> -  - reg: Base address and length of the register block.
> -
> -
> -Examples
> ---------
> -
> -       prr: chipid@ff000044 {
> -               compatible = "renesas,prr";
> -               reg = <0 0xff000044 0 4>;
> -       };
> diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml 
> b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> new file mode 100644
> index 000000000000..9df003041456
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> @@ -0,0 +1,36 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/renesas,prr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas Product Register
> +
> +maintainers:
> +  - Geert Uytterhoeven <[email protected]>
> +  - Magnus Damm <[email protected]>
> +
> +description: |
> +  Most Renesas ARM SoCs have a Product Register or Boundary Scan ID
> +  Register that allows to retrieve SoC product and revision information.
> +  If present, a device node for this register should be added.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +        - const: "renesas,prr"
> +        - const: "renesas,bsid"

enum is better than oneOf+const and drop the quotes. oneOf/allOf/anyOf
result in terrible error messages.

> +  reg:
> +    items:
> +      - description: Base address and length of the register block.

That's what 'reg' *always* is... Just 'maxItems: 1' is sufficient when
there is only 1 entry.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    prr: chipid@ff000044 {
> +        compatible = "renesas,prr";
> +        reg = <0 0xff000044 0 4>;
> +    };
> --
> 2.11.0
>

Reply via email to