PM has been reworked, so eMMC gets now detected on R-Car H3 ES1.0 and
2.0 as well as M3-N without the workaround. Card detect and write
protect also still work. Remove the workaround.
Signed-off-by: Wolfram Sang <wsa+rene...@sang-engineering.com>
---
drivers/mmc/host/tmio_mmc_core.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 9b6e1001e77c..63dc37481fba 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -1208,15 +1208,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
if (!_host->reset)
_host->reset = tmio_mmc_reset;
- /*
- * On Gen2+, eMMC with NONREMOVABLE currently fails because native
- * hotplug gets disabled. It seems RuntimePM related yet we need further
- * research. Since we are planning a PM overhaul anyway, let's enforce
- * for now the device being active by enabling native hotplug always.
- */
- if (pdata->flags & TMIO_MMC_MIN_RCAR2)
- _host->native_hotplug = true;
-
/*
* While using internal tmio hardware logic for card detection, we need
* to ensure it stays powered for it to work.
--
2.20.1
