Hi Laurent
On 18/04/2019 07:37, Laurent Pinchart wrote:
> Hi Kieran,
>
> Thank you for the patch.
>
> On Thu, Apr 11, 2019 at 05:12:55PM +0100, Kieran Bingham wrote:
>> The 'mp' value is used through many calculations in determining the scaling
>> factors of the UDS. Factor this out so that it can be reused in further
>> calculations, and also ensure that if the BLADV control is ever changed only
>> a
>> single function needs to be modified.
>>
>> Signed-off-by: Kieran Bingham <[email protected]>
>> ---
>> drivers/media/platform/vsp1/vsp1_uds.c | 22 ++++++++++++++--------
>> 1 file changed, 14 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/media/platform/vsp1/vsp1_uds.c
>> b/drivers/media/platform/vsp1/vsp1_uds.c
>> index 27012af973b2..c71c24363d54 100644
>> --- a/drivers/media/platform/vsp1/vsp1_uds.c
>> +++ b/drivers/media/platform/vsp1/vsp1_uds.c
>> @@ -46,6 +46,18 @@ void vsp1_uds_set_alpha(struct vsp1_entity *entity,
>> struct vsp1_dl_body *dlb,
>> alpha << VI6_UDS_ALPVAL_VAL0_SHIFT);
>> }
>>
>> +/*
>> + * Determine the pre-filter multiplication value.
>
> This would benefit from a more detailed description, and in particular a
> definition of what "pre-filter" means.
There is a pre-filter processing stage to the scaling filter. I think it
does some form of pixel binning. The specifics are not documented.
I could update this to:
/*
* Determine the pre-filter binning divider
*
* The UDS uses a two stage filter scaler process. This determines the
* rate at which pixels are reduced for large down-scaling ratios before
* being fed into the bicubic filter.
*/
>> + *
>> + * This calculation assumes that the BLADV control is unset.
>
> s/control/bit/ ?
> s/unset/not set/ ?
>
Sure.
>> + */
>> +static unsigned int uds_multiplier(int ratio)
>
> Should the function be renamed to uds_pre_multiplier() ? And isn't it a
> divisor ? :-)
Indeed in the pipeline, the component is used when downscaling, and so
I believe it is part of a pre-filter divider.
How about: uds_binning_ratio() ?
>> +{
>> + unsigned int mp = ratio / 4096;
>> +
>> + return mp < 4 ? 1 : (mp < 8 ? 2 : 4);
>> +}
>> +
>> /*
>> * uds_output_size - Return the output size for an input size and scaling
>> ratio
>> * @input: input size in pixels
>> @@ -55,10 +67,7 @@ static unsigned int uds_output_size(unsigned int input,
>> unsigned int ratio)
>> {
>> if (ratio > 4096) {
>> /* Down-scaling */
>> - unsigned int mp;
>> -
>> - mp = ratio / 4096;
>> - mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4);
>> + unsigned int mp = uds_multiplier(ratio);
>>
>> return (input - 1) / mp * mp * 4096 / ratio + 1;
>> } else {
>> @@ -88,10 +97,7 @@ static unsigned int uds_passband_width(unsigned int ratio)
>> {
>> if (ratio >= 4096) {
>> /* Down-scaling */
>> - unsigned int mp;
>> -
>> - mp = ratio / 4096;
>> - mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4);
>> + unsigned int mp = uds_multiplier(ratio);
>>
>> return 64 * 4096 * mp / ratio;
>> } else {
>
--
Regards
Kieran
