Hello.
Paul Mackerras wrote:
What problem do you see arising from this?
Timers firing too early.
Only if the minimum interrupt latency is less than 1 decrementer
tick. That seems pretty unlikely to me unless you have a very slow
timebase frequency.
Well, MPC8540 has 825 MHz CPU clock yet decrementor/timebase are clocked
with 25 MHz clock if I don't mistake. That gives us 33 CPU clocks of available
interrupt latency...
In fact what we should program the decrementer to is:
timeout - (is_booke? 0: 1) - min_interrupt_latency
BTW, why not handle the decrementer difference right in set_dec() where we
already have #ifdef'ed code?
I was assuming that min_interrupt_latency (measured in timebase ticks)
would be at least 1, but apparently some systems can have a timebase
frequency as low as 1kHz, so we'll have to have an ifdef or something.
IMHO it's better to have #ifdef based on the decremeter model and forget
about the whole issue, rather than to #ifdef based on some bizarre system with
slowish decremeter, isn't it?
Paul.
WBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
