ARM: S3C64XX: Add s3c64xx support to touchscreen driver This ack's the extra interrupt s3c64xx platforms have in the touchscreen driver.
Signed-off-by: Maurus Cuelenaere <[email protected]> --- drivers/input/touchscreen/Kconfig | 6 +++--- drivers/input/touchscreen/s3c2410_ts.c | 28 ++++++++++++++++++++++++---- 2 files changed, 27 insertions(+), 7 deletions(-) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index dfafc76..0378b3d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -146,11 +146,11 @@ config TOUCHSCREEN_FUJITSU module will be called fujitsu-ts. config TOUCHSCREEN_S3C2410 - tristate "Samsung S3C2410 touchscreen input driver" - depends on ARCH_S3C2410 + tristate "Samsung S3C touchscreen input driver" + depends on ARCH_S3C2410 || ARCH_S3C64XX select S3C24XX_ADC help - Say Y here if you have the s3c2410 touchscreen. + Say Y here if you have the s3c touchscreen. If unsure, say N. diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 3debbc2..7dfbc38 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -40,7 +40,9 @@ #include <plat/regs-adc.h> #include <plat/ts.h> +#ifdef PLAT_S3C24XX #include <mach/regs-gpio.h> +#endif #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) @@ -88,6 +90,12 @@ struct s3c2410ts { static struct s3c2410ts ts; +enum s3c_cpu_type { + TYPE_S3C2410, + TYPE_S3C2440, + TYPE_S3C64XX, +}; + /** * s3c2410_ts_connect - configure gpio for s3c2410 systems * @@ -95,6 +103,7 @@ static struct s3c2410ts ts; * connected to the device (later systems such as the S3C2440 integrate * these into the device). */ +#ifdef PLAT_S3C24XX static inline void s3c2410_ts_connect(void) { s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); @@ -102,6 +111,7 @@ static inline void s3c2410_ts_connect(void) s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); } +#endif /** * get_down - return the down state of the pen @@ -169,6 +179,7 @@ static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0); */ static irqreturn_t stylus_irq(int irq, void *dev_id) { + struct platform_device *pdev = to_platform_device(ts.dev); unsigned long data0; unsigned long data1; bool down; @@ -187,6 +198,12 @@ static irqreturn_t stylus_irq(int irq, void *dev_id) else dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count); + + if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + /* Clear pen down/up interrupt */ + writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP); + } + return IRQ_HANDLED; } @@ -295,9 +312,11 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) goto err_clk; } +#ifdef PLAT_S3C24XX /* Configure the touchscreen external FETs on the S3C2410 */ - if (!platform_get_device_id(pdev)->driver_data) + if (platform_get_device_id(pdev)->driver_data == TYPE_S3C2410) s3c2410_ts_connect(); +#endif ts.client = s3c_adc_register(pdev, s3c24xx_ts_select, s3c24xx_ts_conversion, 1); @@ -418,15 +437,16 @@ static struct dev_pm_ops s3c_ts_pmops = { #endif static struct platform_device_id s3cts_driver_ids[] = { - { "s3c2410-ts", 0 }, - { "s3c2440-ts", 1 }, + { "s3c2410-ts", TYPE_S3C2410 }, + { "s3c2440-ts", TYPE_S3C2440 }, + { "s3c64xx-ts", TYPE_S3C64XX }, { } }; MODULE_DEVICE_TABLE(platform, s3cts_driver_ids); static struct platform_driver s3c_ts_driver = { .driver = { - .name = "s3c24xx-ts", + .name = "s3c-ts", .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &s3c_ts_pmops, -- 1.6.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
