On Fri, Jan 22, 2010 at 04:20:14PM +0900, Kukjin Kim wrote: > The s5p6440-clock.c and s5p6440-init.c code in the plat-s5p is specific to > s5p6440 SoC based systems. So these files are being moved to the machine > directory of s5p6440. > > Signed-off-by: Kukjin Kim <[email protected]> > --- > arch/arm/mach-s5p6440/Kconfig | 2 - > arch/arm/mach-s5p6440/Makefile | 2 +- > arch/arm/mach-s5p6440/s5p6440-clock.c | 698 > +++++++++++++++++++++++++++++++++ > arch/arm/mach-s5p6440/s5p6440-init.c | 50 +++ > arch/arm/plat-s5p/Kconfig | 16 - > arch/arm/plat-s5p/Makefile | 5 - > arch/arm/plat-s5p/s5p6440-clock.c | 698 > --------------------------------- > arch/arm/plat-s5p/s5p6440-init.c | 50 --- > 8 files changed, 749 insertions(+), 772 deletions(-) > create mode 100644 arch/arm/mach-s5p6440/s5p6440-clock.c > create mode 100644 arch/arm/mach-s5p6440/s5p6440-init.c > delete mode 100644 arch/arm/plat-s5p/s5p6440-clock.c > delete mode 100644 arch/arm/plat-s5p/s5p6440-init.c
It seems you've not got rename detection turned on or you didn't use git-mv to move these? Also, I thought I asked you to rename the mach-s5p6440 files to clock.c and init.c instead of s5p6440-clock.c and s5p6440-init.c. > diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig > index 3aa2462..4c29ff8 100644 > --- a/arch/arm/mach-s5p6440/Kconfig > +++ b/arch/arm/mach-s5p6440/Kconfig > @@ -9,8 +9,6 @@ if ARCH_S5P6440 > > config CPU_S5P6440 > bool > - select CPU_S5P6440_INIT > - select CPU_S5P6440_CLOCK > help > Enable S5P6440 CPU support > > diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile > index a79b130..b68c9aa 100644 > --- a/arch/arm/mach-s5p6440/Makefile > +++ b/arch/arm/mach-s5p6440/Makefile > @@ -12,7 +12,7 @@ obj- := > > # Core support for S5P6440 system > > -obj-$(CONFIG_CPU_S5P6440) += cpu.o s5p6440-gpio.o > +obj-$(CONFIG_CPU_S5P6440) += cpu.o s5p6440-init.o s5p6440-clock.o > s5p6440-gpio.o > > # machine support > > diff --git a/arch/arm/mach-s5p6440/s5p6440-clock.c > b/arch/arm/mach-s5p6440/s5p6440-clock.c > new file mode 100644 > index 0000000..1250a2c > --- /dev/null > +++ b/arch/arm/mach-s5p6440/s5p6440-clock.c > @@ -0,0 +1,698 @@ > +/* linux/arch/arm/mach-s5p6440/s5p6440-clock.c > + * > + * Copyright (c) 2009 Samsung Electronics Co., Ltd. > + * http://www.samsung.com/ > + * > + * S5P6440 - Clock support > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/list.h> > +#include <linux/errno.h> > +#include <linux/err.h> > +#include <linux/clk.h> > +#include <linux/sysdev.h> > +#include <linux/io.h> > + > +#include <mach/hardware.h> > +#include <mach/map.h> > + > +#include <plat/cpu-freq.h> > +#include <mach/regs-clock.h> > +#include <plat/clock.h> > +#include <plat/cpu.h> > +#include <plat/clock-clksrc.h> > +#include <plat/s5p-clock.h> > +#include <plat/pll.h> > +#include <plat/s5p6440.h> > + > +/* APLL Mux output clock */ > +static struct clksrc_clk clk_mout_apll = { > + .clk = { > + .name = "mout_apll", > + .id = -1, > + }, > + .sources = &clk_src_apll, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, > +}; > + > +static int s5p6440_epll_enable(struct clk *clk, int enable) > +{ > + unsigned int ctrlbit = clk->ctrlbit; > + unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; > + > + if (enable) > + __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); > + else > + __raw_writel(epll_con, S5P_EPLL_CON); > + > + return 0; > +} > + > +static unsigned long s5p6440_epll_get_rate(struct clk *clk) > +{ > + return clk->rate; > +} > + > +static u32 epll_div[][5] = { > + { 36000000, 0, 48, 1, 4 }, > + { 48000000, 0, 32, 1, 3 }, > + { 60000000, 0, 40, 1, 3 }, > + { 72000000, 0, 48, 1, 3 }, > + { 84000000, 0, 28, 1, 2 }, > + { 96000000, 0, 32, 1, 2 }, > + { 32768000, 45264, 43, 1, 4 }, > + { 45158000, 6903, 30, 1, 3 }, > + { 49152000, 50332, 32, 1, 3 }, > + { 67738000, 10398, 45, 1, 3 }, > + { 73728000, 9961, 49, 1, 3 } > +}; > + > +static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) > +{ > + unsigned int epll_con, epll_con_k; > + unsigned int i; > + > + if (clk->rate == rate) /* Return if nothing changed */ > + return 0; > + > + epll_con = __raw_readl(S5P_EPLL_CON); > + epll_con_k = __raw_readl(S5P_EPLL_CON_K); > + > + epll_con_k &= ~(PLL90XX_KDIV_MASK); > + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | > PLL90XX_SDIV_MASK); > + > + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { > + if (epll_div[i][0] == rate) { > + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); > + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | > + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | > + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); > + break; > + } > + } > + > + if (i == ARRAY_SIZE(epll_div)) { > + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); > + return -EINVAL; > + } > + > + __raw_writel(epll_con, S5P_EPLL_CON); > + __raw_writel(epll_con_k, S5P_EPLL_CON_K); > + > + clk->rate = rate; > + > + return 0; > +} > + > +static struct clk_ops s5p6440_epll_ops = { > + .get_rate = s5p6440_epll_get_rate, > + .set_rate = s5p6440_epll_set_rate, > +}; > + > +static struct clksrc_clk clk_mout_epll = { > + .clk = { > + .name = "mout_epll", > + .id = -1, > + }, > + .sources = &clk_src_epll, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, > +}; > + > +static struct clksrc_clk clk_mout_mpll = { > + .clk = { > + .name = "mout_mpll", > + .id = -1, > + }, > + .sources = &clk_src_mpll, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, > +}; > + > +static struct clk clk_h_low = { > + .name = "hclk_low", > + .id = -1, > + .rate = 0, > + .parent = NULL, > + .ctrlbit = 0, > + .ops = &clk_ops_def_setrate, > +}; > + > +static struct clk clk_p_low = { > + .name = "pclk_low", > + .id = -1, > + .rate = 0, > + .parent = NULL, > + .ctrlbit = 0, > + .ops = &clk_ops_def_setrate, > +}; > + > +enum perf_level { > + L0 = 532*1000, > + L1 = 266*1000, > + L2 = 133*1000, > +}; > + > +static const u32 clock_table[][3] = { > + /*{ARM_CLK, DIVarm, DIVhclk}*/ > + {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, > + {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, > + {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, > +}; > + > +static unsigned long s5p6440_armclk_get_rate(struct clk *clk) > +{ > + unsigned long rate = clk_get_rate(clk->parent); > + u32 clkdiv; > + > + /* divisor mask starts at bit0, so no need to shift */ > + clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; > + > + return rate / (clkdiv + 1); > +} > + > +static unsigned long s5p6440_armclk_round_rate(struct clk *clk, > + unsigned long rate) > +{ > + u32 iter; > + > + for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { > + if (rate > clock_table[iter][0]) > + return clock_table[iter-1][0]; > + } > + > + return clock_table[ARRAY_SIZE(clock_table) - 1][0]; > +} > + > +static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) > +{ > + u32 round_tmp; > + u32 iter; > + u32 clk_div0_tmp; > + u32 cur_rate = clk->ops->get_rate(clk); > + unsigned long flags; > + > + round_tmp = clk->ops->round_rate(clk, rate); > + if (round_tmp == cur_rate) > + return 0; > + > + > + for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { > + if (round_tmp == clock_table[iter][0]) > + break; > + } > + > + if (iter >= ARRAY_SIZE(clock_table)) > + iter = ARRAY_SIZE(clock_table) - 1; > + > + local_irq_save(flags); > + if (cur_rate > round_tmp) { > + /* Frequency Down */ > + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); > + clk_div0_tmp |= clock_table[iter][1]; > + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > + > + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & > + ~(S5P_CLKDIV0_HCLK_MASK); > + clk_div0_tmp |= clock_table[iter][2]; > + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > + > + > + } else { > + /* Frequency Up */ > + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & > + ~(S5P_CLKDIV0_HCLK_MASK); > + clk_div0_tmp |= clock_table[iter][2]; > + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > + > + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); > + clk_div0_tmp |= clock_table[iter][1]; > + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > + } > + local_irq_restore(flags); > + > + clk->rate = clock_table[iter][0]; > + > + return 0; > +} > + > +static struct clk_ops s5p6440_clkarm_ops = { > + .get_rate = s5p6440_armclk_get_rate, > + .set_rate = s5p6440_armclk_set_rate, > + .round_rate = s5p6440_armclk_round_rate, > +}; > + > +static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk) > +{ > + unsigned long rate = clk_get_rate(clk->parent); > + > + if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK) > + rate /= 2; > + > + return rate; > +} > + > +static struct clk clk_dout_mpll = { > + .name = "dout_mpll", > + .id = -1, > + .parent = &clk_mout_mpll.clk, > + .ops = &(struct clk_ops) { > + .get_rate = s5p6440_clk_doutmpll_get_rate, > + }, > +}; > + > +int s5p6440_clk48m_ctrl(struct clk *clk, int enable) > +{ > + unsigned long flags; > + u32 val; > + > + /* can't rely on clock lock, this register has other usages */ > + local_irq_save(flags); > + > + val = __raw_readl(S5P_OTHERS); > + if (enable) > + val |= S5P_OTHERS_USB_SIG_MASK; > + else > + val &= ~S5P_OTHERS_USB_SIG_MASK; > + > + __raw_writel(val, S5P_OTHERS); > + > + local_irq_restore(flags); > + > + return 0; > +} > + > +static int s5p6440_pclk_ctrl(struct clk *clk, int enable) > +{ > + return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); > +} > + > +static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) > +{ > + return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); > +} > + > +static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) > +{ > + return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); > +} > + > +static int s5p6440_sclk_ctrl(struct clk *clk, int enable) > +{ > + return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); > +} > + > +static int s5p6440_mem_ctrl(struct clk *clk, int enable) > +{ > + return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); > +} > + > +/* > + * The following clocks will be disabled during clock initialization. It is > + * recommended to keep the following clocks disabled until the driver > requests > + * for enabling the clock. > + */ > +static struct clk init_clocks_disable[] = { > + { > + .name = "nand", > + .id = -1, > + .parent = &clk_h, > + .enable = s5p6440_mem_ctrl, > + .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, > + }, { > + .name = "adc", > + .id = -1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_TSADC, > + }, { > + .name = "i2c", > + .id = -1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_IIC0, > + }, { > + .name = "i2s_v40", > + .id = 0, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_IIS2, > + }, { > + .name = "spi", > + .id = 0, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_SPI0, > + }, { > + .name = "spi", > + .id = 1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_SPI1, > + }, { > + .name = "sclk_spi_48", > + .id = 0, > + .parent = &clk_48m, > + .enable = s5p6440_sclk_ctrl, > + .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, > + }, { > + .name = "sclk_spi_48", > + .id = 1, > + .parent = &clk_48m, > + .enable = s5p6440_sclk_ctrl, > + .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, > + }, { > + .name = "mmc_48m", > + .id = 0, > + .parent = &clk_48m, > + .enable = s5p6440_sclk_ctrl, > + .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, > + }, { > + .name = "mmc_48m", > + .id = 1, > + .parent = &clk_48m, > + .enable = s5p6440_sclk_ctrl, > + .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, > + }, { > + .name = "mmc_48m", > + .id = 2, > + .parent = &clk_48m, > + .enable = s5p6440_sclk_ctrl, > + .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, > + }, { > + .name = "otg", > + .id = -1, > + .parent = &clk_h_low, > + .enable = s5p6440_hclk0_ctrl, > + .ctrlbit = S5P_CLKCON_HCLK0_USB > + }, { > + .name = "post", > + .id = -1, > + .parent = &clk_h_low, > + .enable = s5p6440_hclk0_ctrl, > + .ctrlbit = S5P_CLKCON_HCLK0_POST0 > + }, { > + .name = "lcd", > + .id = -1, > + .parent = &clk_h_low, > + .enable = s5p6440_hclk1_ctrl, > + .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, > + }, { > + .name = "hsmmc", > + .id = 0, > + .parent = &clk_h_low, > + .enable = s5p6440_hclk0_ctrl, > + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, > + }, { > + .name = "hsmmc", > + .id = 1, > + .parent = &clk_h_low, > + .enable = s5p6440_hclk0_ctrl, > + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, > + }, { > + .name = "hsmmc", > + .id = 2, > + .parent = &clk_h_low, > + .enable = s5p6440_hclk0_ctrl, > + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, > + }, { > + .name = "rtc", > + .id = -1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_RTC, > + }, { > + .name = "watchdog", > + .id = -1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_WDT, > + }, { > + .name = "timers", > + .id = -1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_PWM, > + } > +}; > + > +/* > + * The following clocks will be enabled during clock initialization. > + */ > +static struct clk init_clocks[] = { > + { > + .name = "gpio", > + .id = -1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_GPIO, > + }, { > + .name = "uart", > + .id = 0, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_UART0, > + }, { > + .name = "uart", > + .id = 1, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_UART1, > + }, { > + .name = "uart", > + .id = 2, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_UART2, > + }, { > + .name = "uart", > + .id = 3, > + .parent = &clk_p_low, > + .enable = s5p6440_pclk_ctrl, > + .ctrlbit = S5P_CLKCON_PCLK_UART3, > + } > +}; > + > +static struct clk clk_iis_cd_v40 = { > + .name = "iis_cdclk_v40", > + .id = -1, > +}; > + > +static struct clk clk_pcm_cd = { > + .name = "pcm_cdclk", > + .id = -1, > +}; > + > +static struct clk *clkset_spi_mmc_list[] = { > + &clk_mout_epll.clk, > + &clk_dout_mpll, > + &clk_fin_epll, > +}; > + > +static struct clksrc_sources clkset_spi_mmc = { > + .sources = clkset_spi_mmc_list, > + .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), > +}; > + > +static struct clk *clkset_uart_list[] = { > + &clk_mout_epll.clk, > + &clk_dout_mpll > +}; > + > +static struct clksrc_sources clkset_uart = { > + .sources = clkset_uart_list, > + .nr_sources = ARRAY_SIZE(clkset_uart_list), > +}; > + > +static struct clksrc_clk clksrcs[] = { > + { > + .clk = { > + .name = "mmc_bus", > + .id = 0, > + .ctrlbit = S5P_CLKCON_SCLK0_MMC0, > + .enable = s5p6440_sclk_ctrl, > + }, > + .sources = &clkset_spi_mmc, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, > + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, > + }, { > + .clk = { > + .name = "mmc_bus", > + .id = 1, > + .ctrlbit = S5P_CLKCON_SCLK0_MMC1, > + .enable = s5p6440_sclk_ctrl, > + }, > + .sources = &clkset_spi_mmc, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, > + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, > + }, { > + .clk = { > + .name = "mmc_bus", > + .id = 2, > + .ctrlbit = S5P_CLKCON_SCLK0_MMC2, > + .enable = s5p6440_sclk_ctrl, > + }, > + .sources = &clkset_spi_mmc, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, > + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, > + }, { > + .clk = { > + .name = "uclk1", > + .id = -1, > + .ctrlbit = S5P_CLKCON_SCLK0_UART, > + .enable = s5p6440_sclk_ctrl, > + }, > + .sources = &clkset_uart, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, > + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, > + }, { > + .clk = { > + .name = "spi_epll", > + .id = 0, > + .ctrlbit = S5P_CLKCON_SCLK0_SPI0, > + .enable = s5p6440_sclk_ctrl, > + }, > + .sources = &clkset_spi_mmc, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, > + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, > + }, { > + .clk = { > + .name = "spi_epll", > + .id = 1, > + .ctrlbit = S5P_CLKCON_SCLK0_SPI1, > + .enable = s5p6440_sclk_ctrl, > + }, > + .sources = &clkset_spi_mmc, > + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, > + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, > + } > +}; > + > +/* Clock initialisation code */ > +static struct clksrc_clk *init_parents[] = { > + &clk_mout_apll, > + &clk_mout_epll, > + &clk_mout_mpll, > +}; > + > +void __init_or_cpufreq s5p6440_setup_clocks(void) > +{ > + struct clk *xtal_clk; > + unsigned long xtal; > + unsigned long fclk; > + unsigned long hclk; > + unsigned long hclk_low; > + unsigned long pclk; > + unsigned long pclk_low; > + unsigned long epll; > + unsigned long apll; > + unsigned long mpll; > + unsigned int ptr; > + u32 clkdiv0; > + u32 clkdiv3; > + > + /* Set S5P6440 functions for clk_fout_epll */ > + clk_fout_epll.enable = s5p6440_epll_enable; > + clk_fout_epll.ops = &s5p6440_epll_ops; > + > + /* Set S5P6440 functions for arm clock */ > + clk_arm.parent = &clk_mout_apll.clk; > + clk_arm.ops = &s5p6440_clkarm_ops; > + clk_48m.enable = s5p6440_clk48m_ctrl; > + > + clkdiv0 = __raw_readl(S5P_CLK_DIV0); > + clkdiv3 = __raw_readl(S5P_CLK_DIV3); > + > + xtal_clk = clk_get(NULL, "ext_xtal"); > + BUG_ON(IS_ERR(xtal_clk)); > + > + xtal = clk_get_rate(xtal_clk); > + clk_put(xtal_clk); > + > + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), > + __raw_readl(S5P_EPLL_CON_K)); > + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); > + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); > + > + printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ > + " E=%ld.%ldMHz\n", > + print_mhz(apll), print_mhz(mpll), print_mhz(epll)); > + > + fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM); > + hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK); > + pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK); > + > + if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) { > + /* Asynchronous mode */ > + hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); > + } else { > + /* Synchronous mode */ > + hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); > + } > + > + pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW); > + > + printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ > + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", > + print_mhz(hclk), print_mhz(hclk_low), > + print_mhz(pclk), print_mhz(pclk_low)); > + > + clk_fout_mpll.rate = mpll; > + clk_fout_epll.rate = epll; > + clk_fout_apll.rate = apll; > + > + clk_f.rate = fclk; > + clk_h.rate = hclk; > + clk_p.rate = pclk; > + clk_h_low.rate = hclk_low; > + clk_p_low.rate = pclk_low; > + > + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) > + s3c_set_clksrc(init_parents[ptr], true); > + > + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) > + s3c_set_clksrc(&clksrcs[ptr], true); > +} > + > +static struct clk *clks[] __initdata = { > + &clk_ext, > + &clk_mout_epll.clk, > + &clk_mout_mpll.clk, > + &clk_dout_mpll, > + &clk_iis_cd_v40, > + &clk_pcm_cd, > + &clk_p_low, > + &clk_h_low, > +}; > + > +void __init s5p6440_register_clocks(void) > +{ > + struct clk *clkp; > + int ret; > + int ptr; > + > + ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); > + if (ret > 0) > + printk(KERN_ERR "Failed to register %u clocks\n", ret); > + > + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); > + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); > + > + clkp = init_clocks_disable; > + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { > + > + ret = s3c24xx_register_clock(clkp); > + if (ret < 0) { > + printk(KERN_ERR "Failed to register clock %s (%d)\n", > + clkp->name, ret); > + } > + (clkp->enable)(clkp, 0); > + } > + > + s3c_pwmclk_init(); > +} > diff --git a/arch/arm/mach-s5p6440/s5p6440-init.c > b/arch/arm/mach-s5p6440/s5p6440-init.c > new file mode 100644 > index 0000000..56b1e18 > --- /dev/null > +++ b/arch/arm/mach-s5p6440/s5p6440-init.c > @@ -0,0 +1,50 @@ > +/* linux/arch/arm/mach-s5p6440/s5p6440-init.c > + * > + * Copyright (c) 2009 Samsung Electronics Co., Ltd. > + * http://www.samsung.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/kernel.h> > +#include <linux/types.h> > +#include <linux/init.h> > +#include <linux/serial_core.h> > + > +#include <plat/cpu.h> > +#include <plat/devs.h> > +#include <plat/s5p6440.h> > +#include <plat/regs-serial.h> > + > +static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { > + [0] = { > + .name = "pclk_low", > + .divisor = 1, > + .min_baud = 0, > + .max_baud = 0, > + }, > + [1] = { > + .name = "uclk1", > + .divisor = 1, > + .min_baud = 0, > + .max_baud = 0, > + }, > +}; > + > +/* uart registration process */ > +void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) > +{ > + struct s3c2410_uartcfg *tcfg = cfg; > + u32 ucnt; > + > + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { > + if (!tcfg->clocks) { > + tcfg->clocks = s5p6440_serial_clocks; > + tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); > + } > + } > + > + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); > +} > diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig > index e7c31e7..fca6dad 100644 > --- a/arch/arm/plat-s5p/Kconfig > +++ b/arch/arm/plat-s5p/Kconfig > @@ -24,19 +24,3 @@ config PLAT_S5P > select SAMSUNG_IRQ_UART > help > Base platform code for Samsung's S5P series SoC. > - > -if (PLAT_S5P && ARCH_S5P6440) > - > -# Configuration options shared by all S5P64XX implementations > - > -config CPU_S5P6440_INIT > - bool > - help > - Initialisation code for the S5P6440. > - > -config CPU_S5P6440_CLOCK > - bool > - help > - Clock support code for the S5P6440. > - > -endif > diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile > index 92b6474..a7c54b3 100644 > --- a/arch/arm/plat-s5p/Makefile > +++ b/arch/arm/plat-s5p/Makefile > @@ -17,8 +17,3 @@ obj-y += cpu.o > obj-y += clock.o > obj-y += irq.o > obj-y += setup-i2c0.o > - > -# CPU support > - > -obj-$(CONFIG_CPU_S5P6440_INIT) += s5p6440-init.o > -obj-$(CONFIG_CPU_S5P6440_CLOCK) += s5p6440-clock.o > diff --git a/arch/arm/plat-s5p/s5p6440-clock.c > b/arch/arm/plat-s5p/s5p6440-clock.c > deleted file mode 100644 > index 2f412f8..0000000 > --- a/arch/arm/plat-s5p/s5p6440-clock.c > +++ /dev/null > @@ -1,698 +0,0 @@ > -/* linux/arch/arm/plat-s5p/s5p6440-clock.c > - * > - * Copyright (c) 2009 Samsung Electronics Co., Ltd. > - * http://www.samsung.com/ > - * > - * S5P6440 - Clock support > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > -*/ > - > -#include <linux/init.h> > -#include <linux/module.h> > -#include <linux/kernel.h> > -#include <linux/list.h> > -#include <linux/errno.h> > -#include <linux/err.h> > -#include <linux/clk.h> > -#include <linux/sysdev.h> > -#include <linux/io.h> > - > -#include <mach/hardware.h> > -#include <mach/map.h> > - > -#include <plat/cpu-freq.h> > -#include <mach/regs-clock.h> > -#include <plat/clock.h> > -#include <plat/cpu.h> > -#include <plat/clock-clksrc.h> > -#include <plat/s5p-clock.h> > -#include <plat/pll.h> > -#include <plat/s5p6440.h> > - > -/* APLL Mux output clock */ > -static struct clksrc_clk clk_mout_apll = { > - .clk = { > - .name = "mout_apll", > - .id = -1, > - }, > - .sources = &clk_src_apll, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, > -}; > - > -static int s5p6440_epll_enable(struct clk *clk, int enable) > -{ > - unsigned int ctrlbit = clk->ctrlbit; > - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; > - > - if (enable) > - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); > - else > - __raw_writel(epll_con, S5P_EPLL_CON); > - > - return 0; > -} > - > -static unsigned long s5p6440_epll_get_rate(struct clk *clk) > -{ > - return clk->rate; > -} > - > -static u32 epll_div[][5] = { > - { 36000000, 0, 48, 1, 4 }, > - { 48000000, 0, 32, 1, 3 }, > - { 60000000, 0, 40, 1, 3 }, > - { 72000000, 0, 48, 1, 3 }, > - { 84000000, 0, 28, 1, 2 }, > - { 96000000, 0, 32, 1, 2 }, > - { 32768000, 45264, 43, 1, 4 }, > - { 45158000, 6903, 30, 1, 3 }, > - { 49152000, 50332, 32, 1, 3 }, > - { 67738000, 10398, 45, 1, 3 }, > - { 73728000, 9961, 49, 1, 3 } > -}; > - > -static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) > -{ > - unsigned int epll_con, epll_con_k; > - unsigned int i; > - > - if (clk->rate == rate) /* Return if nothing changed */ > - return 0; > - > - epll_con = __raw_readl(S5P_EPLL_CON); > - epll_con_k = __raw_readl(S5P_EPLL_CON_K); > - > - epll_con_k &= ~(PLL90XX_KDIV_MASK); > - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | > PLL90XX_SDIV_MASK); > - > - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { > - if (epll_div[i][0] == rate) { > - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); > - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | > - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | > - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); > - break; > - } > - } > - > - if (i == ARRAY_SIZE(epll_div)) { > - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); > - return -EINVAL; > - } > - > - __raw_writel(epll_con, S5P_EPLL_CON); > - __raw_writel(epll_con_k, S5P_EPLL_CON_K); > - > - clk->rate = rate; > - > - return 0; > -} > - > -static struct clk_ops s5p6440_epll_ops = { > - .get_rate = s5p6440_epll_get_rate, > - .set_rate = s5p6440_epll_set_rate, > -}; > - > -static struct clksrc_clk clk_mout_epll = { > - .clk = { > - .name = "mout_epll", > - .id = -1, > - }, > - .sources = &clk_src_epll, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, > -}; > - > -static struct clksrc_clk clk_mout_mpll = { > - .clk = { > - .name = "mout_mpll", > - .id = -1, > - }, > - .sources = &clk_src_mpll, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, > -}; > - > -static struct clk clk_h_low = { > - .name = "hclk_low", > - .id = -1, > - .rate = 0, > - .parent = NULL, > - .ctrlbit = 0, > - .ops = &clk_ops_def_setrate, > -}; > - > -static struct clk clk_p_low = { > - .name = "pclk_low", > - .id = -1, > - .rate = 0, > - .parent = NULL, > - .ctrlbit = 0, > - .ops = &clk_ops_def_setrate, > -}; > - > -enum perf_level { > - L0 = 532*1000, > - L1 = 266*1000, > - L2 = 133*1000, > -}; > - > -static const u32 clock_table[][3] = { > - /*{ARM_CLK, DIVarm, DIVhclk}*/ > - {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, > - {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, > - {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, > -}; > - > -static unsigned long s5p6440_armclk_get_rate(struct clk *clk) > -{ > - unsigned long rate = clk_get_rate(clk->parent); > - u32 clkdiv; > - > - /* divisor mask starts at bit0, so no need to shift */ > - clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; > - > - return rate / (clkdiv + 1); > -} > - > -static unsigned long s5p6440_armclk_round_rate(struct clk *clk, > - unsigned long rate) > -{ > - u32 iter; > - > - for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { > - if (rate > clock_table[iter][0]) > - return clock_table[iter-1][0]; > - } > - > - return clock_table[ARRAY_SIZE(clock_table) - 1][0]; > -} > - > -static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) > -{ > - u32 round_tmp; > - u32 iter; > - u32 clk_div0_tmp; > - u32 cur_rate = clk->ops->get_rate(clk); > - unsigned long flags; > - > - round_tmp = clk->ops->round_rate(clk, rate); > - if (round_tmp == cur_rate) > - return 0; > - > - > - for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { > - if (round_tmp == clock_table[iter][0]) > - break; > - } > - > - if (iter >= ARRAY_SIZE(clock_table)) > - iter = ARRAY_SIZE(clock_table) - 1; > - > - local_irq_save(flags); > - if (cur_rate > round_tmp) { > - /* Frequency Down */ > - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); > - clk_div0_tmp |= clock_table[iter][1]; > - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > - > - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & > - ~(S5P_CLKDIV0_HCLK_MASK); > - clk_div0_tmp |= clock_table[iter][2]; > - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > - > - > - } else { > - /* Frequency Up */ > - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & > - ~(S5P_CLKDIV0_HCLK_MASK); > - clk_div0_tmp |= clock_table[iter][2]; > - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > - > - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); > - clk_div0_tmp |= clock_table[iter][1]; > - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); > - } > - local_irq_restore(flags); > - > - clk->rate = clock_table[iter][0]; > - > - return 0; > -} > - > -static struct clk_ops s5p6440_clkarm_ops = { > - .get_rate = s5p6440_armclk_get_rate, > - .set_rate = s5p6440_armclk_set_rate, > - .round_rate = s5p6440_armclk_round_rate, > -}; > - > -static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk) > -{ > - unsigned long rate = clk_get_rate(clk->parent); > - > - if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK) > - rate /= 2; > - > - return rate; > -} > - > -static struct clk clk_dout_mpll = { > - .name = "dout_mpll", > - .id = -1, > - .parent = &clk_mout_mpll.clk, > - .ops = &(struct clk_ops) { > - .get_rate = s5p6440_clk_doutmpll_get_rate, > - }, > -}; > - > -int s5p6440_clk48m_ctrl(struct clk *clk, int enable) > -{ > - unsigned long flags; > - u32 val; > - > - /* can't rely on clock lock, this register has other usages */ > - local_irq_save(flags); > - > - val = __raw_readl(S5P_OTHERS); > - if (enable) > - val |= S5P_OTHERS_USB_SIG_MASK; > - else > - val &= ~S5P_OTHERS_USB_SIG_MASK; > - > - __raw_writel(val, S5P_OTHERS); > - > - local_irq_restore(flags); > - > - return 0; > -} > - > -static int s5p6440_pclk_ctrl(struct clk *clk, int enable) > -{ > - return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); > -} > - > -static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) > -{ > - return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); > -} > - > -static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) > -{ > - return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); > -} > - > -static int s5p6440_sclk_ctrl(struct clk *clk, int enable) > -{ > - return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); > -} > - > -static int s5p6440_mem_ctrl(struct clk *clk, int enable) > -{ > - return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); > -} > - > -/* > - * The following clocks will be disabled during clock initialization. It is > - * recommended to keep the following clocks disabled until the driver > requests > - * for enabling the clock. > - */ > -static struct clk init_clocks_disable[] = { > - { > - .name = "nand", > - .id = -1, > - .parent = &clk_h, > - .enable = s5p6440_mem_ctrl, > - .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, > - }, { > - .name = "adc", > - .id = -1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_TSADC, > - }, { > - .name = "i2c", > - .id = -1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_IIC0, > - }, { > - .name = "i2s_v40", > - .id = 0, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_IIS2, > - }, { > - .name = "spi", > - .id = 0, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_SPI0, > - }, { > - .name = "spi", > - .id = 1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_SPI1, > - }, { > - .name = "sclk_spi_48", > - .id = 0, > - .parent = &clk_48m, > - .enable = s5p6440_sclk_ctrl, > - .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, > - }, { > - .name = "sclk_spi_48", > - .id = 1, > - .parent = &clk_48m, > - .enable = s5p6440_sclk_ctrl, > - .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, > - }, { > - .name = "mmc_48m", > - .id = 0, > - .parent = &clk_48m, > - .enable = s5p6440_sclk_ctrl, > - .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, > - }, { > - .name = "mmc_48m", > - .id = 1, > - .parent = &clk_48m, > - .enable = s5p6440_sclk_ctrl, > - .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, > - }, { > - .name = "mmc_48m", > - .id = 2, > - .parent = &clk_48m, > - .enable = s5p6440_sclk_ctrl, > - .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, > - }, { > - .name = "otg", > - .id = -1, > - .parent = &clk_h_low, > - .enable = s5p6440_hclk0_ctrl, > - .ctrlbit = S5P_CLKCON_HCLK0_USB > - }, { > - .name = "post", > - .id = -1, > - .parent = &clk_h_low, > - .enable = s5p6440_hclk0_ctrl, > - .ctrlbit = S5P_CLKCON_HCLK0_POST0 > - }, { > - .name = "lcd", > - .id = -1, > - .parent = &clk_h_low, > - .enable = s5p6440_hclk1_ctrl, > - .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, > - }, { > - .name = "hsmmc", > - .id = 0, > - .parent = &clk_h_low, > - .enable = s5p6440_hclk0_ctrl, > - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, > - }, { > - .name = "hsmmc", > - .id = 1, > - .parent = &clk_h_low, > - .enable = s5p6440_hclk0_ctrl, > - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, > - }, { > - .name = "hsmmc", > - .id = 2, > - .parent = &clk_h_low, > - .enable = s5p6440_hclk0_ctrl, > - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, > - }, { > - .name = "rtc", > - .id = -1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_RTC, > - }, { > - .name = "watchdog", > - .id = -1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_WDT, > - }, { > - .name = "timers", > - .id = -1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_PWM, > - } > -}; > - > -/* > - * The following clocks will be enabled during clock initialization. > - */ > -static struct clk init_clocks[] = { > - { > - .name = "gpio", > - .id = -1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_GPIO, > - }, { > - .name = "uart", > - .id = 0, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_UART0, > - }, { > - .name = "uart", > - .id = 1, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_UART1, > - }, { > - .name = "uart", > - .id = 2, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_UART2, > - }, { > - .name = "uart", > - .id = 3, > - .parent = &clk_p_low, > - .enable = s5p6440_pclk_ctrl, > - .ctrlbit = S5P_CLKCON_PCLK_UART3, > - } > -}; > - > -static struct clk clk_iis_cd_v40 = { > - .name = "iis_cdclk_v40", > - .id = -1, > -}; > - > -static struct clk clk_pcm_cd = { > - .name = "pcm_cdclk", > - .id = -1, > -}; > - > -static struct clk *clkset_spi_mmc_list[] = { > - &clk_mout_epll.clk, > - &clk_dout_mpll, > - &clk_fin_epll, > -}; > - > -static struct clksrc_sources clkset_spi_mmc = { > - .sources = clkset_spi_mmc_list, > - .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), > -}; > - > -static struct clk *clkset_uart_list[] = { > - &clk_mout_epll.clk, > - &clk_dout_mpll > -}; > - > -static struct clksrc_sources clkset_uart = { > - .sources = clkset_uart_list, > - .nr_sources = ARRAY_SIZE(clkset_uart_list), > -}; > - > -static struct clksrc_clk clksrcs[] = { > - { > - .clk = { > - .name = "mmc_bus", > - .id = 0, > - .ctrlbit = S5P_CLKCON_SCLK0_MMC0, > - .enable = s5p6440_sclk_ctrl, > - }, > - .sources = &clkset_spi_mmc, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, > - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, > - }, { > - .clk = { > - .name = "mmc_bus", > - .id = 1, > - .ctrlbit = S5P_CLKCON_SCLK0_MMC1, > - .enable = s5p6440_sclk_ctrl, > - }, > - .sources = &clkset_spi_mmc, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, > - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, > - }, { > - .clk = { > - .name = "mmc_bus", > - .id = 2, > - .ctrlbit = S5P_CLKCON_SCLK0_MMC2, > - .enable = s5p6440_sclk_ctrl, > - }, > - .sources = &clkset_spi_mmc, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, > - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, > - }, { > - .clk = { > - .name = "uclk1", > - .id = -1, > - .ctrlbit = S5P_CLKCON_SCLK0_UART, > - .enable = s5p6440_sclk_ctrl, > - }, > - .sources = &clkset_uart, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, > - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, > - }, { > - .clk = { > - .name = "spi_epll", > - .id = 0, > - .ctrlbit = S5P_CLKCON_SCLK0_SPI0, > - .enable = s5p6440_sclk_ctrl, > - }, > - .sources = &clkset_spi_mmc, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, > - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, > - }, { > - .clk = { > - .name = "spi_epll", > - .id = 1, > - .ctrlbit = S5P_CLKCON_SCLK0_SPI1, > - .enable = s5p6440_sclk_ctrl, > - }, > - .sources = &clkset_spi_mmc, > - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, > - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, > - } > -}; > - > -/* Clock initialisation code */ > -static struct clksrc_clk *init_parents[] = { > - &clk_mout_apll, > - &clk_mout_epll, > - &clk_mout_mpll, > -}; > - > -void __init_or_cpufreq s5p6440_setup_clocks(void) > -{ > - struct clk *xtal_clk; > - unsigned long xtal; > - unsigned long fclk; > - unsigned long hclk; > - unsigned long hclk_low; > - unsigned long pclk; > - unsigned long pclk_low; > - unsigned long epll; > - unsigned long apll; > - unsigned long mpll; > - unsigned int ptr; > - u32 clkdiv0; > - u32 clkdiv3; > - > - /* Set S5P6440 functions for clk_fout_epll */ > - clk_fout_epll.enable = s5p6440_epll_enable; > - clk_fout_epll.ops = &s5p6440_epll_ops; > - > - /* Set S5P6440 functions for arm clock */ > - clk_arm.parent = &clk_mout_apll.clk; > - clk_arm.ops = &s5p6440_clkarm_ops; > - clk_48m.enable = s5p6440_clk48m_ctrl; > - > - clkdiv0 = __raw_readl(S5P_CLK_DIV0); > - clkdiv3 = __raw_readl(S5P_CLK_DIV3); > - > - xtal_clk = clk_get(NULL, "ext_xtal"); > - BUG_ON(IS_ERR(xtal_clk)); > - > - xtal = clk_get_rate(xtal_clk); > - clk_put(xtal_clk); > - > - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), > - __raw_readl(S5P_EPLL_CON_K)); > - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); > - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); > - > - printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ > - " E=%ld.%ldMHz\n", > - print_mhz(apll), print_mhz(mpll), print_mhz(epll)); > - > - fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM); > - hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK); > - pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK); > - > - if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) { > - /* Asynchronous mode */ > - hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); > - } else { > - /* Synchronous mode */ > - hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); > - } > - > - pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW); > - > - printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ > - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", > - print_mhz(hclk), print_mhz(hclk_low), > - print_mhz(pclk), print_mhz(pclk_low)); > - > - clk_fout_mpll.rate = mpll; > - clk_fout_epll.rate = epll; > - clk_fout_apll.rate = apll; > - > - clk_f.rate = fclk; > - clk_h.rate = hclk; > - clk_p.rate = pclk; > - clk_h_low.rate = hclk_low; > - clk_p_low.rate = pclk_low; > - > - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) > - s3c_set_clksrc(init_parents[ptr], true); > - > - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) > - s3c_set_clksrc(&clksrcs[ptr], true); > -} > - > -static struct clk *clks[] __initdata = { > - &clk_ext, > - &clk_mout_epll.clk, > - &clk_mout_mpll.clk, > - &clk_dout_mpll, > - &clk_iis_cd_v40, > - &clk_pcm_cd, > - &clk_p_low, > - &clk_h_low, > -}; > - > -void __init s5p6440_register_clocks(void) > -{ > - struct clk *clkp; > - int ret; > - int ptr; > - > - ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); > - if (ret > 0) > - printk(KERN_ERR "Failed to register %u clocks\n", ret); > - > - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); > - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); > - > - clkp = init_clocks_disable; > - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { > - > - ret = s3c24xx_register_clock(clkp); > - if (ret < 0) { > - printk(KERN_ERR "Failed to register clock %s (%d)\n", > - clkp->name, ret); > - } > - (clkp->enable)(clkp, 0); > - } > - > - s3c_pwmclk_init(); > -} > diff --git a/arch/arm/plat-s5p/s5p6440-init.c > b/arch/arm/plat-s5p/s5p6440-init.c > deleted file mode 100644 > index 9017825..0000000 > --- a/arch/arm/plat-s5p/s5p6440-init.c > +++ /dev/null > @@ -1,50 +0,0 @@ > -/* linux/arch/arm/plat-s5p/s5p6440-init.c > - * > - * Copyright (c) 2009 Samsung Electronics Co., Ltd. > - * http://www.samsung.com/ > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > -*/ > - > -#include <linux/kernel.h> > -#include <linux/types.h> > -#include <linux/init.h> > -#include <linux/serial_core.h> > - > -#include <plat/cpu.h> > -#include <plat/devs.h> > -#include <plat/s5p6440.h> > -#include <plat/regs-serial.h> > - > -static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { > - [0] = { > - .name = "pclk_low", > - .divisor = 1, > - .min_baud = 0, > - .max_baud = 0, > - }, > - [1] = { > - .name = "uclk1", > - .divisor = 1, > - .min_baud = 0, > - .max_baud = 0, > - }, > -}; > - > -/* uart registration process */ > -void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) > -{ > - struct s3c2410_uartcfg *tcfg = cfg; > - u32 ucnt; > - > - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { > - if (!tcfg->clocks) { > - tcfg->clocks = s5p6440_serial_clocks; > - tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); > - } > - } > - > - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); > -} > -- > 1.6.2.5 > -- -- Ben Q: What's a light-year? A: One-third less calories than a regular year. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
