Hello,
On Thursday, May 27, 2010 10:53 AM Ben Dooks wrote:
> On Thu, May 27, 2010 at 05:22:01PM +0900, Kukjin Kim wrote:
> > From: Abhilash Kesavan <a.kesa...@samsung.com>
> >
> > Following is added for the CF-ATA driver:
> > - Platform data strucure definition and instantiation
> > - Platform device definition and enabling code
> > - Platform-specific gpio setup code
> > - CF controller register definitions
> >
> > Signed-off-by: Abhilash Kesavan <a.kesa...@samsung.com>
> > Signed-off-by: Thomas Abraham <thomas...@samsung.com>
> > Signed-off-by: Kukjin Kim <kgene....@samsung.com>
> > ---
> > arch/arm/mach-s3c64xx/Kconfig | 7 +++
> > arch/arm/mach-s3c64xx/Makefile | 1 +
> > arch/arm/mach-s3c64xx/clock.c | 6 +++
> > arch/arm/mach-s3c64xx/include/mach/map.h | 5 ++-
> > arch/arm/mach-s3c64xx/include/mach/regs-clock.h | 5 ++
> > arch/arm/mach-s3c64xx/mach-smdk6410.c | 9 ++++
> > arch/arm/mach-s3c64xx/s3c6410.c | 1 +
> > arch/arm/mach-s3c64xx/setup-ide.c | 55
> ++++++++++++++++++++++
> > arch/arm/plat-samsung/Kconfig | 5 ++
> > arch/arm/plat-samsung/Makefile | 1 +
> > arch/arm/plat-samsung/dev-ide.c | 52
> +++++++++++++++++++++
> > arch/arm/plat-samsung/include/plat/ata.h | 38 +++++++++++++++
> > arch/arm/plat-samsung/include/plat/devs.h | 1 +
> > arch/arm/plat-samsung/include/plat/regs-ata.h | 56
> +++++++++++++++++++++++
>
> it would have been useful to keep the plat-samsung changes
> seperate.
>
> > 14 files changed, 241 insertions(+), 1 deletions(-)
> > create mode 100644 arch/arm/mach-s3c64xx/setup-ide.c
> > create mode 100644 arch/arm/plat-samsung/dev-ide.c
> > create mode 100644 arch/arm/plat-samsung/include/plat/ata.h
> > create mode 100644 arch/arm/plat-samsung/include/plat/regs-ata.h
> >
> > diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-
> s3c64xx/Kconfig
> > index f5a5972..c00401e 100644
> > --- a/arch/arm/mach-s3c64xx/Kconfig
> > +++ b/arch/arm/mach-s3c64xx/Kconfig
> > @@ -67,6 +67,11 @@ config S3C64XX_SETUP_SDHCI_GPIO
> > help
> > Common setup code for S3C64XX SDHCI GPIO configurations
> >
> > +config S3C64XX_SETUP_IDE
> > + bool
> > + help
> > + Common setup code for S3C64XX IDE.
> > +
> > # S36400 Macchine support
> >
> > config MACH_SMDK6400
> > @@ -101,9 +106,11 @@ config MACH_SMDK6410
> > select S3C_DEV_USB_HSOTG
> > select S3C_DEV_WDT
> > select HAVE_S3C2410_WATCHDOG
> > + select S3C_DEV_IDE
> > select S3C64XX_SETUP_SDHCI
> > select S3C64XX_SETUP_I2C1
> > select S3C64XX_SETUP_FB_24BPP
> > + select S3C64XX_SETUP_IDE
> > help
> > Machine support for the Samsung SMDK6410
> >
> > diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-
> s3c64xx/Makefile
> > index 9d10069..0d52c35 100644
> > --- a/arch/arm/mach-s3c64xx/Makefile
> > +++ b/arch/arm/mach-s3c64xx/Makefile
> > @@ -38,6 +38,7 @@ obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
> > obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
> > obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
> > obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> > +obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
> >
> > # PM
> >
> > diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-
> s3c64xx/clock.c
> > index 7a4138b..9dac5c4 100644
> > --- a/arch/arm/mach-s3c64xx/clock.c
> > +++ b/arch/arm/mach-s3c64xx/clock.c
> > @@ -304,6 +304,12 @@ static struct clk init_clocks[] = {
> > .id = -1,
> > .parent = &clk_p,
> > .ctrlbit = S3C_CLKCON_PCLK_AC97,
> > + }, {
> > + .name = "cfcon",
> > + .id = -1,
> > + .parent = &clk_h,
> > + .enable = s3c64xx_hclk_ctrl,
> > + .ctrlbit = S3C_CLKCON_HCLK_IHOST,
> > }
> > };
> >
> > diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-
> s3c64xx/include/mach/map.h
> > index e1eab3c..4b1ac79 100644
> > --- a/arch/arm/mach-s3c64xx/include/mach/map.h
> > +++ b/arch/arm/mach-s3c64xx/include/mach/map.h
> > @@ -86,6 +86,9 @@
> > #define S3C64XX_SZ_GPIO SZ_4K
> >
> > #define S3C64XX_PA_SDRAM (0x50000000)
> > +
> > +#define S3C64XX_PA_CFCON (0x70300000)
> > +
> > #define S3C64XX_PA_VIC0 (0x71200000)
> > #define S3C64XX_PA_VIC1 (0x71300000)
> >
> > @@ -118,7 +121,7 @@
> > #define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
> > #define S3C_PA_RTC S3C64XX_PA_RTC
> > #define S3C_PA_WDT S3C64XX_PA_WATCHDOG
> > -
> > +#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
> > #define SAMSUNG_PA_ADC S3C64XX_PA_ADC
> >
> > #endif /* __ASM_ARCH_6400_MAP_H */
> > diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
> b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
> > index 0114eb0..05332b9 100644
> > --- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
> > +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
> > @@ -34,6 +34,7 @@
> > #define S3C_SCLK_GATE S3C_CLKREG(0x38)
> > #define S3C_MEM0_GATE S3C_CLKREG(0x3C)
> > #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
> > +#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
> >
> > /* CLKDIV0 */
> > #define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
> > @@ -154,4 +155,8 @@
> > #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
> > #define S3C6400_CLKSRC_MFC (1 << 4)
> >
> > +/* MEM_SYS_CFG */
> > +#define MEM_SYS_CFG_INDEP_CF 0x4000
> > +#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
> > +
> > #endif /* _PLAT_REGS_CLOCK_H */
> > diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-
> s3c64xx/mach-smdk6410.c
> > index d9a0355..cc1bb0f 100644
> > --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
> > +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
> > @@ -56,6 +56,7 @@
> > #include <mach/regs-gpio.h>
> > #include <mach/regs-sys.h>
> > #include <mach/regs-srom.h>
> > +#include <plat/ata.h>
> > #include <plat/iic.h>
> > #include <plat/fb.h>
> > #include <plat/gpio-cfg.h>
> > @@ -242,6 +243,11 @@ static struct platform_device smdk6410_b_pwr_5v = {
> > };
> > #endif
> >
> > +static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
> > + .setup_gpio = s3c_ide_setup_gpio,
> > + .cfg_mode = s3c_ide_cfg_mode,
>
>
> These should have been called s3c64xx_ide...
>
> I'll have a think about what we should be doing with this, it might
> be wroth passing this via the archdata and leaving the platform data
> for the board. If these configs are generally going to be per SoC
> then i'd prefer to see this in the archdata and once per SoC.
>
> > +};
> > +
> > static struct map_desc smdk6410_iodesc[] = {};
> >
> > static struct platform_device *smdk6410_devices[] __initdata = {
> > @@ -267,6 +273,7 @@ static struct platform_device *smdk6410_devices[]
> __initdata = {
> > &s3c_device_adc,
> > &s3c_device_ts,
> > &s3c_device_wdt,
> > + &s3c_device_cfcon,
> > };
> >
> > #ifdef CONFIG_REGULATOR
> > @@ -665,6 +672,8 @@ static void __init smdk6410_machine_init(void)
> > i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
> > i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
> >
> > + s3c_ide_set_platdata(&smdk6410_ide_pdata);
> > +
> > platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
> > }
> >
> > diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-
> s3c64xx/s3c6410.c
> > index 014401c..1d1dce4 100644
> > --- a/arch/arm/mach-s3c64xx/s3c6410.c
> > +++ b/arch/arm/mach-s3c64xx/s3c6410.c
> > @@ -58,6 +58,7 @@ void __init s3c6410_map_io(void)
> > s3c_device_nand.name = "s3c6400-nand";
> > s3c_onenand_setname("s3c6410-onenand");
> > s3c64xx_onenand1_setname("s3c6410-onenand");
> > + s3c_device_cfcon.name = "s3c6400-pata";
> > }
>
> let's get this sorted out and use one method. see Kyungmin Park's prev.
> comments on the subject.
There are boards that doesn't have cf/ide connector at all. It would be good
to have s3c-dev not compiled in for some custom kernels. It would be better
to hide the driver name change behind a function/macro like it is done for
the one-nand driver.
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
