v2: init gpio mode/value right after gpio_request
Signed-off-by: Vasily Khoruzhick <[email protected]>
---
arch/arm/mach-s3c2410/include/mach/h1940-latch.h | 2 +-
arch/arm/mach-s3c2410/mach-h1940.c | 80 ++++++++++++++++++----
2 files changed, 66 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index ef7d8cf..97e42bf 100644
--- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -20,7 +20,7 @@
/* SD layer latch */
-#define H1940_LATCH_SDQ1 H1940_LATCH_GPIO(0)
+#define H1940_LATCH_LCD_P0 H1940_LATCH_GPIO(0)
#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1)
#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2)
#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3)
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c
b/arch/arm/mach-s3c2410/mach-h1940.c
index cc8660e..974c6e4 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -106,13 +106,7 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata
= {
/* Board control latch control */
-static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) |
- H1940_LATCH_BIT(H1940_LATCH_SM803_ENABLE) |
- H1940_LATCH_BIT(H1940_LATCH_SDQ1) |
- H1940_LATCH_BIT(H1940_LATCH_LCD_P1) |
- H1940_LATCH_BIT(H1940_LATCH_LCD_P2) |
- H1940_LATCH_BIT(H1940_LATCH_LCD_P3) |
- H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN);
+static unsigned int latch_state;
static void h1940_latch_control(unsigned int clear, unsigned int set)
{
@@ -275,15 +269,32 @@ static int h1940_backlight_init(struct device *dev)
gpio_direction_output(S3C2410_GPB(0), 0);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
return 0;
}
+static int h1940_backlight_notify(struct device *dev, int brightness)
+{
+ if (!brightness) {
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+ } else {
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
+ }
+ return brightness;
+}
+
static void h1940_backlight_exit(struct device *dev)
{
gpio_direction_output(S3C2410_GPB(0), 1);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
}
+
static struct platform_pwm_backlight_data backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
@@ -291,6 +302,7 @@ static struct platform_pwm_backlight_data backlight_data = {
/* tcnt = 0x31 */
.pwm_period_ns = 36296,
.init = h1940_backlight_init,
+ .notify = h1940_backlight_notify,
.exit = h1940_backlight_exit,
};
@@ -309,19 +321,37 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd,
int value;
if (!power) {
- /* set to 3ec */
- gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_set_value(S3C2410_GPC(0), 0);
/* wait for 3ac */
do {
value = gpio_get_value(S3C2410_GPC(6));
} while (value);
- /* set to 38c */
- gpio_direction_output(S3C2410_GPC(5), 0);
+
+ gpio_set_value(H1940_LATCH_LCD_P2, 0);
+ gpio_set_value(H1940_LATCH_LCD_P3, 0);
+ gpio_set_value(H1940_LATCH_LCD_P4, 0);
+
+ gpio_direction_output(S3C2410_GPC(1), 0);
+ gpio_direction_output(S3C2410_GPC(4), 0);
+
+ gpio_set_value(H1940_LATCH_LCD_P1, 0);
+ gpio_set_value(H1940_LATCH_LCD_P0, 0);
+
+ gpio_set_value(S3C2410_GPC(5), 0);
+
} else {
- /* Set to 3ac */
- gpio_direction_output(S3C2410_GPC(5), 1);
- /* Set to 3ad */
- gpio_direction_output(S3C2410_GPC(0), 1);
+ gpio_set_value(H1940_LATCH_LCD_P0, 1);
+ gpio_set_value(H1940_LATCH_LCD_P1, 1);
+
+ s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
+
+ gpio_set_value(S3C2410_GPC(5), 1);
+ gpio_set_value(S3C2410_GPC(0), 1);
+
+ gpio_set_value(H1940_LATCH_LCD_P3, 1);
+ gpio_set_value(H1940_LATCH_LCD_P2, 1);
+ gpio_set_value(H1940_LATCH_LCD_P4, 1);
}
}
@@ -366,6 +396,8 @@ static void __init h1940_map_io(void)
#endif
s3c_pm_init();
+ /* Add latch gpio chip, set latch initial value */
+ h1940_latch_control(0, 0);
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
@@ -404,9 +436,27 @@ static void __init h1940_init(void)
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
+ gpio_request(S3C2410_GPC(1), "LCD power");
+ gpio_request(S3C2410_GPC(4), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power");
+ gpio_request(H1940_LATCH_LCD_P0, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P1, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P2, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P3, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P4, "LCD power");
+ gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
+ gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_direction_output(S3C2410_GPC(1), 0);
+ gpio_direction_output(S3C2410_GPC(4), 0);
+ gpio_direction_output(S3C2410_GPC(5), 0);
gpio_direction_input(S3C2410_GPC(6));
+ gpio_direction_output(H1940_LATCH_LCD_P0, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P1, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P2, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P3, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P4, 0);
+ gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
gpio_request(H1940_LATCH_USB_DP, "USB pullup");
gpio_direction_output(H1940_LATCH_USB_DP, 0);
--
1.7.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
