Seungwhan Youn wrote:
> 
> This patch add SCLK_SPDIF clock to support source clock of S/PDIF
> on S5PV210.
> 
> Signed-off-by: Seungwhan Youn <[email protected]>
> ---
>  arch/arm/mach-s5pv210/clock.c |   62
> +++++++++++++++++++++++++++++++++++------
>  1 files changed, 53 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
> index d562670..195a088 100644
> --- a/arch/arm/mach-s5pv210/clock.c
> +++ b/arch/arm/mach-s5pv210/clock.c
> @@ -431,6 +431,12 @@ static struct clk init_clocks_disable[] = {
>               .parent         = &clk_p,
>               .enable         = s5pv210_clk_ip3_ctrl,
>               .ctrlbit        = (1 << 6),
> +     }, {
> +             .name           = "spdif",
> +             .id             = -1,
> +             .parent         = &clk_p,
> +             .enable         = s5pv210_clk_ip3_ctrl,
> +             .ctrlbit        = (1 << 0),
>       },
>  };
> 
> @@ -660,6 +666,53 @@ static struct clksrc_sources clkset_sclk_spdif = {
>       .nr_sources     = ARRAY_SIZE(clkset_sclk_spdif_list),
>  };
> 
> +static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate)
> +{
> +     struct clk *pclk;
> +     int ret;
> +
> +     pclk = clk_get_parent(clk);
> +     if (IS_ERR(pclk))
> +             return -EINVAL;
> +
> +     ret = pclk->ops->set_rate(pclk, rate);
> +     clk_put(pclk);
> +
> +     return ret;
> +}
> +

Similar with previous reply...please refer to it...

> +static unsigned long s5pv210_spdif_get_rate(struct clk *clk)
> +{
> +     struct clk *pclk;
> +     int rate;
> +
> +     pclk = clk_get_parent(clk);
> +     if (IS_ERR(pclk))
> +             return -EINVAL;
> +
> +     rate = pclk->ops->get_rate(clk);
> +     clk_put(pclk);
> +
> +     return rate;
> +}
> +
> +static struct clk_ops s5pv210_sclk_spdif_ops = {
> +     .set_rate       = s5pv210_spdif_set_rate,
> +     .get_rate       = s5pv210_spdif_get_rate,
> +};
> +
> +static struct clksrc_clk clk_sclk_spdif = {
> +     .clk            = {
> +             .name           = "sclk_spdif",
> +             .id             = -1,
> +             .enable         = s5pv210_clk_mask0_ctrl,
> +             .ctrlbit        = (1 << 27),
> +             .ops            = &s5pv210_sclk_spdif_ops,
> +     },
> +     .sources = &clkset_sclk_spdif,
> +     .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
> +};
> +
>  static struct clk *clkset_group2_list[] = {
>       [0] = &clk_ext_xtal_mux,
>       [1] = &clk_xusbxti,
> @@ -744,15 +797,6 @@ static struct clksrc_clk clksrcs[] = {
>               .sources = &clkset_sclk_mixer,
>               .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
>       }, {
> -             .clk            = {
> -                     .name           = "sclk_spdif",
> -                     .id             = -1,
> -                     .enable         = s5pv210_clk_mask0_ctrl,
> -                     .ctrlbit        = (1 << 27),
> -             },
> -             .sources = &clkset_sclk_spdif,
> -             .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
> -     }, {
>               .clk    = {
>                       .name           = "sclk_fimc",
>                       .id             = 0,
> --


Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to