MyungJoo Ham wrote: > > On Fri, Oct 8, 2010 at 8:41 AM, Kukjin Kim <[email protected]> wrote: > > From: Changhwan Youn <[email protected]> > > > > S3C2410_RTCCON of TYPE_S3C64XX RTC should be read/written by > > readw and writew, because TYPE_S3C64XX RTC uses bit 8 and 9. > > And TYPE_S3C2410 RTC also can access it by readw and writew. > > > > Signed-off-by: Changhwan Youn <[email protected]> > > [[email protected]: tested on smdk2416] > > Tested-by: Atul Dahiya <[email protected]> > > Signed-off-by: Kukjin Kim <[email protected]> > > Cc: Ben Dooks <[email protected]> > > --- > > drivers/rtc/rtc-s3c.c | 36 ++++++++++++++++++------------------ > > 1 files changed, 18 insertions(+), 18 deletions(-) > > Hello, > Hi, > > Sorry for a late reply... > Yeah, too late :-(
> Anyway, I have a small question in this rtc-s3c.c driver. > > Is there any reason to use read/write b/w to access registers of rtc-s3c? > See the git comment. > Why don't we use readl/writel when accessing registers in this drivers I don't know why we should use readl/writel for all case... even though we can use just word or byte access. > and just forget which registers require at least 8 or 16 or 32 bits? > > In fact, it appears that readw/writew accesses 16bits, not 32bits in Yes... > ARM machines, which may incur problems with TICCNT/CURTICCNT > registers. > I can't get your comment... Thanks. Best regards, Kgene. -- Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
