On 11/30/2010 03:33 PM, Vasily Khoruzhick wrote:
> On Tuesday 30 November 2010 15:12:37 Lars-Peter Clausen wrote:
>
>> Hi
>>
>> While this might work for setting the pullup, what to you want to return in
>> get_pull?
>
> Some custom value like S3C_GPIO_PULL_ENABLED?
Well, or we could use a custom setter and getter functions for configuring the
pull-ups/downs.
>
>> The reason why s3c24xx_gpiocfg_default needs to have {get,set}_pull set at
>> compile time is that the board init code is called before the cpu init
>> code. Which is in my opinion a bit odd and should be fixed instead.
>
> That's because cpu init code is arch_initcall. Kernel calls mdesc-
>> init_machine before any arch_initcall function, not sure if it can be fixed
> without massive rework of existing code.
Both the cpu init code and the machine init code are run at arch_initcall.
>
>> If it is not fixed for whatever reason we could fallback to using some sort
>> of "cpu_is_s3c2442() ? S3C_GPIO_PULL_UP : S3C_GPIO_PULL_DOWN"
>
> AFAIK, Ben does not like runtime CPUtype checks
>
I prefer it over broken code. And you would only need it until the cpu init
functions
have been run.
You would add a wrapper like:
s3c24xx_set_pull(...)
{
if (cpu_is_s3c2442())
s3c_gpio_setpull_1down(...)
else
s3c_gpio_setpull_1up(...)
}
And then set s3c24xx_gpiocfg_default.{set,get}_pull to those at compile time.
And
once the cpu init code runs replace them with either s3c_gpio_setpull_1down or
s3c_gpio_setpull_1up depending on the cpu.
- Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
