On 01/13/2011 10:33 AM, Kukjin Kim wrote: > Sylwester Nawrocki wrote: >> >> MIPI_PHYn_CONTROL registers are shared between MIPI DSIM >> and MIPI CSIS drivers so a spinlock is used to protect multiple >> access to these registers. Also a proper state of a common >> PHY enable bit is maintained in order to avoid a DSIM >> and CSIS driver conflict. >> >> Signed-off-by: Sylwester Nawrocki <[email protected]> >> Signed-off-by: Kyungmin Park <[email protected]> >> --- ... > > Basically, it's not good that each machine(SoC) has each own setup-mipi... > Because it is very similar(almost same)...means can move it in plat-s5p with > following. > > 1. # of MIPI PHY can be calculated by platform device id > 2. can use same definition of MIPI PHY control address with same name > re-mapping.
Yes, I agree with that. Originally I had it done it plat-s5p, I will prepare a merged version. The main difference between s5pv210 and s5pv310 indeed was the register naming and placement in PMU or CLK subsystem, so the register address definitions were in regs-clk.h or regs-pmu.h. So there just will have to be included different header files depending on on SoC architecture. Regards, -- Sylwester Nawrocki Samsung Poland R&D Center -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
