Sylwester Nawrocki wrote:
>
> Add I2C0 bus platform device for camera sensors.
>
> Signed-off-by: Sylwester Nawrocki <[email protected]>
> Signed-off-by: Kyungmin Park <[email protected]>
> ---
> arch/arm/mach-s5pv210/Kconfig | 1 +
> arch/arm/mach-s5pv210/mach-goni.c | 4 ++++
> 2 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index 53aabef..b0aa462 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -75,6 +75,7 @@ config MACH_GONI
> bool "GONI"
> select CPU_S5PV210
> select S5P_GPIO_INT
> + select S3C_DEV_I2C0
NO...Where is S3C_DEV_I2C0?
Basically, platform device of i2c0 which is in
arch/arm/plat-samsung/dev-i2c0.c is always selected.
> select S3C_DEV_FB
> select S5P_DEV_FIMC0
> select S5P_DEV_FIMC1
> diff --git a/arch/arm/mach-s5pv210/mach-goni.c
b/arch/arm/mach-s5pv210/mach-
> goni.c
> index e22d511..fc34575 100644
> --- a/arch/arm/mach-s5pv210/mach-goni.c
> +++ b/arch/arm/mach-s5pv210/mach-goni.c
> @@ -800,6 +800,7 @@ static struct platform_device *goni_devices[]
__initdata
> = {
> &s5pv210_device_iis0,
> &s3c_device_usb_hsotg,
> &samsung_device_keypad,
> + &s3c_device_i2c0,
> &s3c_device_i2c1,
> &s3c_device_i2c2,
> &wm8994_fixed_voltage0,
> @@ -827,6 +828,9 @@ static void __init goni_machine_init(void)
> /* Radio: call before I2C 1 registeration */
> goni_radio_init();
>
> + /* I2C0 */
> + s3c_i2c0_set_platdata(NULL);
> +
> /* I2C1 */
> s3c_i2c1_set_platdata(NULL);
> i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
> --
> 1.7.3.5
Others, ok...please re-work this against on latest my for-next.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
